Kaotings/KT24-1110_65E-HA-651B
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
main
KT24-1110_65E-HA-651B/cpu/br25/charge.c

546 lines
14 KiB
C
Raw Permalink Normal View History

inited
2024-11-10 10:44:17 +00:00
#include "asm/clock.h"
#include "timer.h"
#include "asm/power/p33.h"
#include "asm/charge.h"
#include "uart.h"
#include "device/device.h"
#include "asm/power_interface.h"
/*#include "power/power_hw.h"*/
#include "system/event.h"
#include "asm/efuse.h"
#include "gpio.h"
#include "app_config.h"
#include "asm/adc_api.h"
#define LOG_TAG_CONST CHARGE
#define LOG_TAG "[CHARGE]"
#define LOG_INFO_ENABLE
#define LOG_DUMP_ENABLE
#define LOG_ERROR_ENABLE
#define LOG_DEBUG_ENABLE
#include "debug.h"
#define IO_PORT_LDOIN 58//IO编号
#define BIT_LDO5V_IN BIT(0)
#define BIT_LDO5V_OFF BIT(1)
#define BIT_LDO5V_ERR BIT(2)
enum {
CHARGE_TIMER_10_MS = 0,
CHARGE_TIMER_10_S,
} CHARGE_CHECK_TIME;
typedef struct _CHARGE_VAR {
struct charge_platform_data *data;
volatile u8 charge_online_flag;
volatile u8 init_ok;
volatile u8 timer_period;
volatile int ldo5v_timer;
volatile int charge_timer;
volatile int charge_timer_pre;
} CHARGE_VAR;
#define __this (&charge_var)
static CHARGE_VAR charge_var;
static u8 charge_flag;
extern void charge_set_callback(void (*wakup_callback)(void), void (*sub_callback)(void));
u8 get_charge_poweron_en(void)
{
return __this->data->charge_poweron_en;
}
void charge_check_and_set_pinr(u8 level)
{
u8 pinr_io;
if (P33_CON_GET(P3_PINR_CON) & BIT(0)) {
pinr_io = P33_CON_GET(P3_PORT_SEL10);
if (pinr_io == IO_PORT_LDOIN) {
if (level == 0) {
P33_CON_SET(P3_PINR_CON, 2, 1, 0);
} else {
P33_CON_SET(P3_PINR_CON, 2, 1, 1);
}
}
}
}
static void udelay(u32 usec)
{
JL_TIMER0->CON = BIT(14);
JL_TIMER0->CNT = 0;
#if(TCFG_CLOCK_SYS_SRC==SYS_CLOCK_INPUT_PLL_RCL)//省晶振，注意时钟源
JL_TIMER0->PRD = clk_get("lsb") / 1000000L * usec; //1us
JL_TIMER0->CON = BIT(0); // clk
#else
JL_TIMER0->PRD = clk_get("timer") / 1000000L * usec; //1us
JL_TIMER0->CON = BIT(0) | BIT(3); //sys clk
#endif
while ((JL_TIMER0->CON & BIT(15)) == 0);
JL_TIMER0->CON = BIT(14);
}
static u8 check_charge_state(void)
{
u8 online_cnt = 0;
u8 i = 0;
//only for br23 fix charge load too small
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 1);
}
__this->charge_online_flag = 0;
for (i = 0; i < 20; i++) {
if (LVCMP_DET_GET() || LDO5V_DET_GET()) {
online_cnt++;
}
udelay(1000);
}
log_info("online_cnt = %d\n", online_cnt);
if (online_cnt > 5) {
__this->charge_online_flag = 1;
}
return __this->charge_online_flag;
}
//only for br23 fix charge load too small
void charge_reset_pb5_pd_status(void)
{
if (__this->data == NULL) {
return;
}
switch (charge_flag) {
case 0:
case BIT_LDO5V_OFF:
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 1);
}
break;
case BIT_LDO5V_IN:
case BIT_LDO5V_ERR:
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 0);
}
break;
}
}
//only for br23/br25,还是负载弱问题
bool charge_check_wakeup_is_set_ok(void)
{
#if TCFG_CHARGE_ENABLE
//判断插拔检测设置是否正确
if (LDO5V_IS_EN() && LDO5V_EDGE_WKUP_IS_EN()) {
//设置为下降沿时(bit1 = 1),当前状态应该为插入(bit5 = 1)
//设置为上升沿时(bit1 = 0),当前状态应该为拔出(bit5 = 0)
if (LDO5V_EDGE_GET() ^ LDO5V_DET_GET()) {
return FALSE;
}
}
#endif
return TRUE;
}
void set_charge_online_flag(u8 flag)
{
__this->charge_online_flag = flag;
}
u8 get_charge_online_flag(void)
{
return __this->charge_online_flag;
}
u8 get_ldo5v_online_hw(void)
{
return LDO5V_DET_GET();
}
u8 get_lvcmp_det(void)
{
return LVCMP_DET_GET();
}
u8 get_ldo5v_pulldown_en(void)
{
return __this->data->ldo5v_pulldown_en;
}
void charge_event_to_user(u8 event)
{
struct sys_event e;
e.type = SYS_DEVICE_EVENT;
e.arg = (void *)DEVICE_EVENT_FROM_CHARGE;
e.u.dev.event = event;
e.u.dev.value = 0;
sys_event_notify(&e);
}
static void set_charge_wkup_source(u8 source)
{
CHARGE_WKUP_EDGE_SEL(0); //0:上升沿,高电平 1:下降沿，低电平
CHARGE_WKUP_SOURCE_SEL(source);
CHARGE_EDGE_DETECT_EN(1);
CHARGE_LEVEL_DETECT_EN(1);
CHARGE_WKUP_EN(1);
CHARGE_WKUP_PND_CLR();
}
void charge_start(void)
{
log_info("%s\n", __func__);
if (__this->charge_timer_pre) {
sys_hi_timer_del(__this->charge_timer_pre);
__this->charge_timer_pre = 0;
}
if (__this->charge_timer) {
sys_timer_del(__this->charge_timer);
__this->charge_timer = 0;
}
set_charge_wkup_source(CHARGE_FULL_33V);
CHGBG_EN(1);
CHARGE_EN(1);
/* PDIO_KEEP(1);//防止进入pdown后充电通路被切断 */
charge_event_to_user(CHARGE_EVENT_CHARGE_START);
//开始充电,加速电池电压采集速率
adc_set_sample_freq(AD_CH_VBAT, 5000);
}
void charge_close(void)
{
log_info("%s\n", __func__);
CHARGE_WKUP_EN(0);
CHARGE_EDGE_DETECT_EN(0);
CHARGE_LEVEL_DETECT_EN(0);
CHGBG_EN(0);
CHARGE_EN(0);
CHARGE_WKUP_PND_CLR();
/* PDIO_KEEP(0); */
charge_event_to_user(CHARGE_EVENT_CHARGE_CLOSE);
if (__this->charge_timer_pre) {
sys_hi_timer_del(__this->charge_timer_pre);
__this->charge_timer_pre = 0;
}
if (__this->charge_timer) {
sys_timer_del(__this->charge_timer);
__this->charge_timer = 0;
}
//关闭充电,恢复电池电压采集速率
adc_set_sample_freq(AD_CH_VBAT, 30000);
}
static void charge_full_detect(void *priv)
{
static u16 charge_full_cnt = 0;
u16 vbat_vol = adc_get_voltage(AD_CH_VBAT) * 4 / 10;
u16 vpwr_vol = adc_get_voltage(AD_CH_LDO5V) * 4 / 10;
if (__this->timer_period == CHARGE_TIMER_10_S) {
sys_timer_modify(__this->charge_timer, 10);
__this->timer_period = CHARGE_TIMER_10_MS;
}
//满足 充满标记 && (VPWR > VBAT) && (VPWR > 4.5V) && (VBAT > 4.1V)
if (CHARGE_FULL_FLAG_GET() && LVCMP_DET_GET() && (vpwr_vol > 450) && (vbat_vol >= ((get_charge_full_value() - 100) / 10))) {
/* putchar('F'); */
if (charge_full_cnt < 5) {
charge_full_cnt++;
} else {
charge_full_cnt = 0;
sys_timer_del(__this->charge_timer);
__this->charge_timer = 0;
charge_event_to_user(CHARGE_EVENT_CHARGE_FULL);
}
} else {
/* putchar('K'); */
charge_full_cnt = 0;
sys_timer_modify(__this->charge_timer, 10000);
__this->timer_period = CHARGE_TIMER_10_S;
}
}
static void charge_full_detect_pre(void *priv)
{
u8 full_flag, lvcmp_lvl;
static u16 charge_no_full_cnt = 0;
sys_hi_timer_del(__this->charge_timer_pre);
__this->charge_timer_pre = 0;
full_flag = CHARGE_FULL_FLAG_GET();
lvcmp_lvl = LVCMP_DET_GET();
if (full_flag && lvcmp_lvl) {
goto __exit_det_pre;
} else {
if ((!full_flag) && lvcmp_lvl) {
//电压正常且连续起了n个充满中断后,进入查询方式
charge_no_full_cnt++;
if (charge_no_full_cnt > 50) {
goto __exit_det_pre;
}
} else {
charge_no_full_cnt = 0;
}
CHARGE_EDGE_DETECT_EN(1);
CHARGE_LEVEL_DETECT_EN(1);
}
return;
__exit_det_pre:
//充满信号检测到之后,切换检测方式,采用查询方法(为了提高充电效率)
//若不进入查询方式,此时充满中断会频繁唤醒系统,系统功耗会增大,造成充电效率低
charge_no_full_cnt = 0;
__this->charge_timer = sys_timer_add(NULL, charge_full_detect, 10);
__this->timer_period = CHARGE_TIMER_10_MS;
return;
}
static void ldo5v_detect(void *priv)
{
/* log_info("%s\n",__func__); */
static u16 ldo5v_in_normal_cnt = 0;
static u16 ldo5v_in_err_cnt = 0;
static u16 ldo5v_off_cnt = 0;
if (LVCMP_DET_GET()) { //ldoin > vbat
/* putchar('X'); */
ldo5v_off_cnt = 0;
ldo5v_in_err_cnt = 0;
if (ldo5v_in_normal_cnt < 50) {
ldo5v_in_normal_cnt++;
} else {
/* printf("ldo5V_IN\n"); */
set_charge_online_flag(1);
ldo5v_in_normal_cnt = 0;
sys_hi_timer_del(__this->ldo5v_timer);
__this->ldo5v_timer = 0;
if ((charge_flag & BIT_LDO5V_IN) == 0) {
charge_flag = BIT_LDO5V_IN;
//only for br23/br25 fix charge load too small
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 0);
}
charge_event_to_user(CHARGE_EVENT_LDO5V_IN);
LVCMP_EDGE_SEL(1); //检测ldoin比vbat电压低的情况(充电仓给电池充满后会关断，此时电压会掉下来)
LDO5V_EDGE_SEL(1);
}
}
} else if (LDO5V_DET_GET() == 0) { //ldoin<拔出电压（0.6）
/* putchar('Q'); */
ldo5v_in_normal_cnt = 0;
ldo5v_in_err_cnt = 0;
if (ldo5v_off_cnt < (__this->data->ldo5v_off_filter + 10)) {
ldo5v_off_cnt++;
} else {
/* printf("ldo5V_OFF\n"); */
set_charge_online_flag(0);
ldo5v_off_cnt = 0;
sys_hi_timer_del(__this->ldo5v_timer);
__this->ldo5v_timer = 0;
if ((charge_flag & BIT_LDO5V_OFF) == 0) {
charge_flag = BIT_LDO5V_OFF;
LVCMP_EDGE_SEL(0);//拔出后重新检测插入
LDO5V_EDGE_SEL(0);
//only for br23/br25 fix charge load too small
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 1);
}
charge_event_to_user(CHARGE_EVENT_LDO5V_OFF);
}
}
} else { //拔出电压（0.6左右）< ldoin < vbat
ldo5v_in_normal_cnt = 0;
/* putchar('E'); */
ldo5v_off_cnt = 0;
if (ldo5v_in_err_cnt < 50) {
ldo5v_in_err_cnt++;
} else {
/* printf("ldo5V_ERR\n"); */
set_charge_online_flag(1);
ldo5v_in_err_cnt = 0;
sys_hi_timer_del(__this->ldo5v_timer);
__this->ldo5v_timer = 0;
if ((charge_flag & BIT_LDO5V_ERR) == 0) {
charge_flag = BIT_LDO5V_ERR;
LVCMP_EDGE_SEL(0);
LDO5V_EDGE_SEL(1);
//only for br23/br25 fix charge load too small
if (__this->data->ldo5v_pulldown_en) {
gpio_set_pull_down(IO_PORTB_05, 0);
}
if (__this->data->ldo5v_off_filter) {
charge_event_to_user(CHARGE_EVENT_LDO5V_KEEP);
}
}
}
}
}
void sub_wakeup_isr(void)
{
if (__this->ldo5v_timer == 0) {
__this->ldo5v_timer = sys_hi_timer_add(0, ldo5v_detect, 2);
}
}
void charge_wakeup_isr(void)
{
/* printf("\ncharge_wkup_deal\n"); */
if (__this->charge_timer_pre == 0) {
__this->charge_timer_pre = sys_hi_timer_add(0, charge_full_detect_pre, 2);
}
}
#if 0
static void test_func(void *priv)
{
if (P33_CON_GET(P3_CHG_READ) & BIT(0)) {
JL_PORTA->DIR &= ~BIT(3);
JL_PORTA->OUT |= BIT(3);
} else {
JL_PORTA->OUT &= ~BIT(3);
}
}
#endif
u8 get_charge_mA_config(void)
{
return __this->data->charge_mA;
}
void set_charge_mA(u8 charge_mA)
{
static u8 charge_mA_old = 0xff;
if (charge_mA_old != charge_mA) {
charge_mA_old = charge_mA;
CHARGE_mA_SEL(charge_mA);
}
}
const u16 full_table[CHARGE_FULL_V_MAX] = {
3869, 3907, 3946, 3985, 4026, 4068, 4122, 4157,
4202, 4249, 4295, 4350, 4398, 4452, 4509, 4567,
};
u16 get_charge_full_value(void)
{
ASSERT(__this->init_ok, "charge not init ok!\n");
ASSERT(__this->data->charge_full_V < CHARGE_FULL_V_MAX);
return full_table[__this->data->charge_full_V];
}
static void charge_config(void)
{
u8 charge_4202_trim_val = CHARGE_FULL_V_4202;
u8 offset = 0;
u8 charge_full_v_val = 0;
if (get_vbat_trim() == 0xf) {
log_info("vbat not trim, use default config!!!!!!");
} else {
charge_4202_trim_val = get_vbat_trim(); //4.2V对应的trim出来的实际档位
}
log_info("charge_4202_trim_val = %d\n", charge_4202_trim_val);
if (__this->data->charge_full_V >= CHARGE_FULL_V_4202) {
offset = __this->data->charge_full_V - CHARGE_FULL_V_4202;
charge_full_v_val = charge_4202_trim_val + offset;
if (charge_full_v_val > 0xf) {
charge_full_v_val = 0xf;
}
} else {
offset = CHARGE_FULL_V_4202 - __this->data->charge_full_V;
if (charge_4202_trim_val >= offset) {
charge_full_v_val = charge_4202_trim_val - offset;
} else {
charge_full_v_val = 0;
}
}
log_info("charge_full_v_val = %d\n", charge_full_v_val);
CHARGE_FULL_V_SEL(charge_full_v_val);
CHARGE_FULL_mA_SEL(__this->data->charge_full_mA);
/* CHARGE_mA_SEL(__this->data->charge_mA); */
CHARGE_mA_SEL(CHARGE_mA_20);
}
int charge_init(const struct dev_node *node, void *arg)
{
log_info("%s\n", __func__);
__this->data = (struct charge_platform_data *)arg;
ASSERT(__this->data);
__this->init_ok = 0;
__this->charge_online_flag = 0;
/*先关闭充电使能，后面检测到充电插入再开启*/
/* CHGBG_EN(0); */
/* CHARGE_EN(0); */
/*LDO5V的100K下拉电阻使能*/
L5V_LOAD_EN(__this->data->ldo5v_pulldown_en);
/*LDO5V,检测上升沿，用于检测ldoin插入*/
LDO5V_EN(1);
LDO5V_EDGE_SEL(0);
LDO5V_PND_CLR();
LDO5V_EDGE_WKUP_EN(1);
/*LVCMP,检测上升沿，用于检测ldoin插入*/
LVCMP_EN(1);
LVCMP_EDGE_SEL(0);
LVCMP_PND_CLR();
LVCMP_EDGE_WKUP_EN(1);
/*使用COMPH,在LDOIN和VBAT比较接近时检测信号会抖动,所以切成使用COMPL,注意softoff需要切成COMPH*/
/*COMPH:LDO5V<->VBAT COMPL:LDO5V<->VDD50*/
LVCMP_CMP_SEL(1);
charge_config();
if (check_charge_state()) {
if (__this->ldo5v_timer == 0) {
__this->ldo5v_timer = sys_hi_timer_add(0, ldo5v_detect, 2);
}
} else {
charge_flag = BIT_LDO5V_OFF;
CHARGE_WKUP_PND_CLR();
CHGBG_EN(0);
CHARGE_EN(0);
}
charge_set_callback(charge_wakeup_isr, sub_wakeup_isr);
/* sys_hi_timer_add(0,test_func,1); */
adc_add_sample_ch(AD_CH_LDO5V);
__this->init_ok = 1;
return 0;
}
/* const struct device_operations charge_dev_ops = { */
/* .init = charge_init, */
/* }; */
Reference in New Issue Copy Permalink