Kaotings/KT24-1110_65E-HA-651B
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
50d8f1f7c1
KT24-1110_65E-HA-651B/include_lib/btstack/avctp_user.h

640 lines
24 KiB
C
Raw Normal View History

inited
2024-11-10 10:44:17 +00:00
#ifndef __AVCTP_USER_H__
#define __AVCTP_USER_H__
#include "typedef.h"
#include "btstack_typedef.h"
///***注意：该文件的枚举与库编译密切相关，主要是给用户提供调用所用。用户不能自己在中间添加值。*/
////----user (command) codes----////
typedef enum {
/*
使用user_send_cmd_prepare(USER_CMD_TYPE cmd,u16 param_len,u8 *param)发送命令
//返回0表支持参数个数正确，返回1表不支持，2是参数错误
要三个参数，没参数说明的命令参数param_len传0，param传NULL
例子A、USER_CTRL_HFP_CALL_SET_VOLUME命令需要1个参数的使用例子：
u8 vol = 8;
user_send_cmd_prepare(USER_CTRL_HFP_CALL_SET_VOLUME,1, &vol);
例子B、USER_CTRL_DIAL_NUMBER 参数要用数组先存起来，param_len是号码长度，param可传参数数组指针，
user_val->income_phone_num已经存好号码
user_send_cmd_prepare(USER_CTRL_DIAL_NUMBER,user_val->phone_num_len,user_val->income_phone_num);
*/
//链路操作部分
//回连,使用的是VM的地址，一般按键操作不使用该接口
USER_CTRL_START_CONNECTION,
//通过地址去连接，如果知道地址想去连接使用该接口
USER_CTRL_START_CONNEC_VIA_ADDR,
//通过指定地址手动回连，该地址是最后一个断开设备的地址
USER_CTRL_START_CONNEC_VIA_ADDR_MANUALLY,
//通过地址去连接spp，如果知道地址想去连接使用该接口
USER_CTRL_START_CONNEC_SPP_VIA_ADDR,
//断开连接，断开当前所有蓝牙连接
USER_CTRL_DISCONNECTION_HCI,
//取消链接
USER_CTRL_CONNECTION_CANCEL,
//读取远端名字
USER_CTRL_READ_REMOTE_NAME,
//连接或断开SCO或esco,选择这个命令会自动判断要断开还是连接sco
USER_CTRL_PAUSE_MUSIC,
//连接或断开SCO或esco,选择这个命令会自动判断要断开还是连接sco
USER_CTRL_SCO_LINK,
//连接SCO或esco
USER_CTRL_CONN_SCO,
//断开sco或esco
USER_CTRL_DISCONN_SCO,
//断开SDP，一般按键操作不使用该接口
USER_CTRL_DISCONN_SDP_MASTER,
//关闭蓝牙可发现
USER_CTRL_WRITE_SCAN_DISABLE,
//打开蓝牙可发现
USER_CTRL_WRITE_SCAN_ENABLE,
// USER_CTRL_WRITE_SCAN_ENABLE_KEY ,
//关闭蓝牙可连接
USER_CTRL_WRITE_CONN_DISABLE,
//打开蓝牙可连接
USER_CTRL_WRITE_CONN_ENABLE,
// USER_CTRL_WRITE_CONN_ENABLE_KEY ,
//控制蓝牙搜索，需要搜索附件设备做功能的连续说明情况在补充完善功能
USER_CTRL_SEARCH_DEVICE,
//取消搜索
USER_CTRL_INQUIRY_CANCEL,
//取消配对
USER_CTRL_PAGE_CANCEL,
///进入sniff模式，一般按键操作不使用该接口
USER_CTRL_SNIFF_IN,
USER_CTRL_SNIFF_EXIT,
USER_CTRL_ALL_SNIFF_EXIT,
//hfp链路部分
//控制打电话音量，注意可能有些手机进度条有变化音量大小没变化，同步要设置样机DAC音量
/*跟电话音量操作有关的操作最终都执行回调函数call_vol_change*/
USER_CTRL_HFP_CMD_BEGIN,
USER_CTRL_HFP_CALL_VOLUME_UP, /*音量加1，手机可以同步显示*/
USER_CTRL_HFP_CALL_VOLUME_DOWN, /*音量减1，手机可以同步显示*/
USER_CTRL_HFP_CALL_SET_VOLUME, /*设置固定值，手机可以同步显示，需要传1个音量值*/
USER_CTRL_HFP_CALL_GET_VOLUME, /*获取音量，默认从call_vol_change返回*/
//来电接听电话
USER_CTRL_HFP_CALL_ANSWER,
//挂断电话
USER_CTRL_HFP_CALL_HANGUP,
//回拨上一个打出电话
USER_CTRL_HFP_CALL_LAST_NO,
//获取当前通话电话号码
USER_CTRL_HFP_CALL_CURRENT,
//通话过程中根据提示输入控制
/*例子
char num = '1';
user_send_cmd_prepare(USER_CTRL_HFP_DTMF_TONES,1,(u8 *)&num);
*/
//发送打电话时的信号选择DTMF tones ,有一个参数，参数支持{0-9, *, #, A, B, C, D}
USER_CTRL_HFP_DTMF_TONES,
//根据电话号码拨号
/**USER_CTRL_DIAL_NUMBER命令有参数，参数要用数组先存起来，
param_len是号码长度，param可传参数数组指针*/
USER_CTRL_DIAL_NUMBER,
//发送电量 /**要连接上HFP才有用*/
USER_CTRL_SEND_BATTERY,
//*控制siri状态*//*可以注册回调函数获取返回值*/
USER_CTRL_HFP_GET_SIRI_STATUS,
//*开启siri*/
USER_CTRL_HFP_GET_SIRI_OPEN,
//*关闭siri,一般说完话好像自动关闭了,如果要提前终止可调用*/
USER_CTRL_HFP_GET_SIRI_CLOSE,
/*获取手机的日期和时间，苹果可以，一般安卓机好像都不行*/
USER_CTRL_HFP_GET_PHONE_DATE_TIME,
USER_CTRL_HFP_CMD_SEND_BIA,
/*获取手机厂商的命令 */
USER_CTRL_HFP_CMD_GET_MANUFACTURER,
/*更新当前的电量给手机*/
USER_CTRL_HFP_CMD_UPDATE_BATTARY,
//三方通话操作
//应答
USER_CTRL_HFP_THREE_WAY_ANSWER1, //挂断当前去听另一个（未接听或者在保留状态都可以）
USER_CTRL_HFP_THREE_WAY_ANSWER2, //保留当前去接听, 或者用于两个通话的切换
USER_CTRL_HFP_THREE_WAY_ANSWER1X,
USER_CTRL_HFP_THREE_WAY_ANSWER2X,
USER_CTRL_HFP_THREE_WAY_ANSWER3,
//拒听
USER_CTRL_HFP_THREE_WAY_REJECT, //拒绝后台来电
USER_CTRL_HFP_DISCONNECT, //断开HFP连接
USER_CTRL_HFP_CMD_END,
//音乐控制部分
USER_CTRL_AVCTP_CMD_BEGIN,
//音乐播放
USER_CTRL_AVCTP_OPID_PLAY,
//音乐暂停
USER_CTRL_AVCTP_OPID_PAUSE,
//音乐停止
USER_CTRL_AVCTP_OPID_STOP,
//音乐下一首
USER_CTRL_AVCTP_OPID_NEXT,
//音乐上一首
USER_CTRL_AVCTP_OPID_PREV,
//音乐快进
USER_CTRL_AVCTP_OPID_FORWARD,
//音乐快退
USER_CTRL_AVCTP_OPID_REWIND,
//音乐循环模式
USER_CTRL_AVCTP_OPID_REPEAT_MODE,
USER_CTRL_AVCTP_OPID_SHUFFLE_MODE,
//获取播放歌曲总时间和当前时间接口
USER_CTRL_AVCTP_OPID_GET_PLAY_TIME,
//同步音量接口
USER_CTRL_AVCTP_OPID_SEND_VOL,
// //AVCTP断开，是音乐控制链路，一般不使用
USER_CTRL_AVCTP_DISCONNECT,
// //AVCTP连接，是音乐控制链路，一般不使用
USER_CTRL_AVCTP_CONN,
USER_CTRL_AVCTP_CMD_END,
//高级音频部分
USER_CTRL_A2DP_CMD_BEGIN,
//有判断条件的，回连过程连接高级音频，避免手机连也自动发起连接，一般按键操作不使用该接口
USER_CTRL_AUTO_CONN_A2DP,
//连接高级音频，回来最后一个断开设备的地址
USER_CTRL_CONN_A2DP,
//断开高级音频，只断开高级音频链路，如果有电话还会保留
USER_CTRL_DISCONN_A2DP,
//maybe BQB test will use
USER_CTRL_A2DP_CMD_START ,
USER_CTRL_A2DP_CMD_CLOSE ,
USER_CTRL_A2DP_CMD_SUSPEND ,
USER_CTRL_A2DP_CMD_GET_CONFIGURATION ,
USER_CTRL_A2DP_CMD_ABORT ,
USER_CTRL_A2DP_CMD_END,
//蓝牙关闭
USER_CTRL_POWER_OFF,
//蓝牙开启
USER_CTRL_POWER_ON,
///*hid操作定义*/
USER_CTRL_HID_CMD_BEGIN,
//按键连接
USER_CTRL_HID_CONN,
// //只发一个按键，安卓手机使用
USER_CTRL_HID_ANDROID,
//只发一个按键，苹果和部分安卓手机适用
USER_CTRL_HID_IOS,
// //发两个拍照按键
USER_CTRL_HID_BOTH,
//HID断开
USER_CTRL_HID_DISCONNECT,
//Home Key,apply to IOS and Android
USER_CTRL_HID_HOME ,
//Return Key,only support Android
USER_CTRL_HID_RETURN ,
//LeftArrow Key
USER_CTRL_HID_LEFTARROW ,
//RightArrow Key
USER_CTRL_HID_RIGHTARROW ,
//Volume Up
USER_CTRL_HID_VOL_UP ,
//Volume Down
USER_CTRL_HID_VOL_DOWN ,
USER_CTRL_HID_SEND_DATA ,
USER_CTRL_HID_CMD_END,
/*对箱操作命令*/
USER_CTRL_TWS_CMD_BEGIN,
USER_CTRL_SYNC_TRAIN,
USER_CTRL_SYNC_TRAIN_SCAN,
USER_CTRL_MONITOR,
USER_CTRL_TWS_CONNEC_VIA_ADDR,
USER_CTRL_TWS_COTROL_CDM,
//清除对箱连接信息
USER_CTRL_TWS_CLEAR_INFO,
//断开对箱连接
USER_CTRL_TWS_DISCONNECTION_HCI,
//发起对箱连接
USER_CTRL_TWS_START_CONNECTION,
USER_CTRL_TWS_SYNC_CDM,
USER_CTRL_TWS_SYNC_SBC_CDM,
USER_CTRL_TWS_RESTART_SBC_CDM,
USER_CTRL_SYNC_TRAIN_CANCEL,
USER_CTRL_SYNC_TRAIN_SCAN_CANCEL,
USER_CTRL_TWS_SYNC_CDM_FUN,
USER_CTRL_TWS_LINEIN_START,
USER_CTRL_TWS_LINEIN_CLOSE,
USER_CTRL_TWS_CMD_END,
///蓝牙串口发送命令
USER_CTRL_SPP_CMD_BEGIN,
/**USER_CTRL_SPP_SEND_DATA命令有参数，参数会先存起来，
param_len是数据长度，param发送数据指针
返回0,表示准备成功，会PENDing发完才返回
3表示上一包数据没发完，*/
USER_CTRL_SPP_SEND_DATA, //len <= 512
USER_CTRL_SPP_TRY_SEND_DATA,//
USER_CTRL_SPP_UPDATA_DATA,
//serial port profile disconnect command
USER_CTRL_SPP_DISCONNECT,
USER_CTRL_SPP_CMD_END,
///pbg发送命令
USER_CTRL_PBG_CMD_BEGIN,
USER_CTRL_PBG_SEND_DATA,//len <= 512
USER_CTRL_PBG_TRY_SEND_DATA,//
USER_CTRL_PBG_CMD_END,
///adt 发送命令
USER_CTRL_ADT_CMD_BEGIN,
USER_CTRL_ADT_CONNECT,
USER_CTRL_ADT_KEY_MIC_OPEN,
USER_CTRL_ADT_SEND_DATA,//len <= 512
USER_CTRL_ADT_TRY_SEND_DATA,//
USER_CTRL_ADT_CMD_END,
///蓝牙电话本功能发送命令
USER_CTRL_PBAP_CMD_BEGIN,
//电话本功能读取通话记录的前n条
USER_CTRL_PBAP_READ_PART,
//电话本功能读全部记录
USER_CTRL_PBAP_READ_ALL,
//电话本功能中断读取记录
USER_CTRL_PBAP_STOP_READING,
USER_CTRL_PBAP_CMD_END,
//蓝牙其他操作
// //删除最新的一个设备记忆
// USER_CTRL_DEL_LAST_REMOTE_INFO ,
// //删除所有设备记忆
USER_CTRL_DEL_ALL_REMOTE_INFO,
USER_CTRL_TEST_KEY,
USER_CTRL_SEND_USER_INFO,
USER_CTRL_KEYPRESS,
USER_CTRL_PAIR,
USER_CTRL_AFH_CHANNEL,
USER_CTRL_HALF_SEC_LOOP_CREATE,
USER_CTRL_HALF_SEC_LOOP_DEL,
USER_CTRL_CMD_SYNC_VOL_INC,
USER_CTRL_CMD_SYNC_VOL_DEC,
USER_CTRL_CMD_CHANGE_PROFILE_MODE,
USER_CTRL_CMD_RESERVE_INDEX4,
USER_CTRL_CMD_RESUME_STACK,
USER_CTRL_AVCTP_OPID_GET_MUSIC_INFO,
USER_CTRL_LAST
} USER_CMD_TYPE;
////----反馈给客户使用的状态----////
typedef enum {
/*下面是一些即时反馈的状态，无法重复获取的状态*/
BT_STATUS_POWER_ON = 1, /*上电*/
BT_STATUS_POWER_OFF = 2,
BT_STATUS_INIT_OK, /*初始化完成*/
BT_STATUS_EXIT_OK, /*蓝牙退出完成*/
BT_STATUS_START_CONNECTED, /*开始连接*/
BT_STATUS_FIRST_CONNECTED, /*连接成功*/
BT_STATUS_SECOND_CONNECTED, /*连接成功*/
BT_STATUS_ENCRY_COMPLETE, /*加密完成*/
BT_STATUS_FIRST_DISCONNECT, /*断开连接*/
BT_STATUS_SECOND_DISCONNECT, /*断开连接*/
BT_STATUS_PHONE_INCOME, /*来电*/
BT_STATUS_PHONE_NUMBER, /*来电话号码*/
BT_STATUS_PHONE_MANUFACTURER, /*获取手机的厂商*/
BT_STATUS_PHONE_OUT, /*打出电话*/
BT_STATUS_PHONE_ACTIVE, /*接通电话*/
BT_STATUS_PHONE_HANGUP, /*挂断电话*/
BT_STATUS_BEGIN_AUTO_CON, /*发起回连*/
BT_STATUS_MUSIC_SOUND_COME, /*库中加入auto mute判断音乐播放开始*/
BT_STATUS_MUSIC_SOUND_GO, /*库中加入auto mute判断音乐播放暂停*/
BT_STATUS_RESUME, /*后台有效，手动切回蓝牙*/
BT_STATUS_RESUME_BTSTACK, /*后台有效，后台时来电切回蓝牙*/
BT_STATUS_SUSPEND, /*蓝牙挂起，退出蓝牙*/
BT_STATUS_LAST_CALL_TYPE_CHANGE, /*最后拨打电话的类型，只区分打入和打出两种状态*/
BT_STATUS_CALL_VOL_CHANGE, /*通话过程中设置音量会产生这个状态变化*/
BT_STATUS_SCO_STATUS_CHANGE, /*当esco/sco连接或者断开时会产生这个状态变化*/
BT_STATUS_CONNECT_WITHOUT_LINKKEY, /*判断是首次连接还是配对后的连接，主要依据要不要简易配对或者pin code*/
BT_STATUS_PHONE_BATTERY_CHANGE, /*电话电量变化，该状态仅6个等级，0-5*/
BT_STATUS_RECONNECT_LINKKEY_LOST, /*回连时发现linkkey丢失了，即手机取消配对了*/
BT_STATUS_RECONN_OR_CONN, /*回连成功还是被连接*/
BT_STATUS_BT_TEST_BOX_CMD, /*蓝牙收到测试盒消息。1-升级，2-fast test*/
BT_STATUS_BT_TWS_CONNECT_CMD,
BT_STATUS_SNIFF_STATE_UPDATE, /*SNIFF STATE UPDATE*/
BT_STATUS_TONE_BY_FILE_NAME, /*直接使用文件名播放提示音*/
BT_STATUS_PHONE_DATE_AND_TIME, /*获取到手机的时间和日期，注意会有兼容性问题*/
BT_STATUS_INBAND_RINGTONE,
BT_STATUS_VOICE_RECOGNITION,
BT_STATUS_AVRCP_INCOME_OPID, /*收到远端设备发过来的AVRCP命令*/
BT_STATUS_HFP_SERVICE_LEVEL_CONNECTION_OK,
BT_STATUS_CONN_A2DP_CH,
BT_STATUS_CONN_HFP_CH,
BT_STATUS_INQUIRY_TIMEOUT,
/*下面是1个持续的状态，是get_stereo_bt_connect_status获取*/
/*下面是6个持续的状态，是get_bt_connect_status()获取*/
BT_STATUS_INITING, /*正在初始化*/
BT_STATUS_WAITINT_CONN, /*等待连接*/
BT_STATUS_AUTO_CONNECTINT, /*正在回连*/
BT_STATUS_CONNECTING, /*已连接，没有电话和音乐在活动*/
BT_STATUS_TAKEING_PHONE, /*正在电话*/
BT_STATUS_PLAYING_MUSIC, /*正在音乐*/
BT_STATUS_A2DP_MEDIA_START,
BT_STATUS_A2DP_MEDIA_STOP,
BT_STATUS_BROADCAST_STATE,/*braoadcaset中*/
BT_STATUS_TRIM_OVER, /*测试盒TRIM完成*/
} STATUS_FOR_USER;
typedef enum {
BT_CALL_BATTERY_CHG = 0, //电池电量改变
BT_CALL_SIGNAL_CHG, //网络信号改变
BT_CALL_INCOMING, //电话打入
BT_CALL_OUTGOING, //电话打出
BT_CALL_ACTIVE, //接通电话
BT_CALL_HANGUP, //电话挂断
BT_CALL_ALERT, //远端reach
BT_CALL_VOL_CHANGED,
} BT_CALL_IND_STA;
typedef enum {
BT_MUSIC_STATUS_IDLE = 0,
BT_MUSIC_STATUS_STARTING,
BT_MUSIC_STATUS_SUSPENDING,
} BT_MUSIC_STATE; //音乐状态
#define SYS_BT_EVENT_TYPE_CON_STATUS (('C' << 24) | ('O' << 16) | ('N' << 8) | '\0')
#define SYS_BT_EVENT_TYPE_HCI_STATUS (('H' << 24) | ('C' << 16) | ('I' << 8) | '\0')
#define REMOTE_DEFAULT 0x00
#define REMOTE_SINK 0x01
#define REMOTE_SOURCE 0x02
#define SPP_CH 0x01
#define HFP_CH 0x02
#define A2DP_CH 0x04 //media
#define AVCTP_CH 0x08
#define HID_CH 0x10
#define AVDTP_CH 0x20
#define PBAP_CH 0x40
#define HFP_AG_CH 0x80
#define A2DP_SRC_CH 0x2000
struct sniff_ctrl_config_t {
u16 sniff_max_interval;
u16 sniff_mix_interval;
u16 sniff_attemp;
u16 sniff_timeout;
u8 sniff_addr[6];
};
extern u32 user_send_cmd_prepare(USER_CMD_TYPE cmd, u16 param_len, u8 *param);
extern u32 user_emitter_cmd_prepare(USER_CMD_TYPE cmd, u16 param_len, u8 *param);
u8 get_emitter_connect_status(void);
u16 get_emitter_curr_channel_state();
u8 get_emitter_a2dp_status(void);
/*
u16 get_curr_channel_state(); 与 channel 判断区分
主动获取当前链路的连接状态，可以用来判断有哪些链路连接上了
*/
extern u16 get_curr_channel_state();
/*
u8 get_call_status(); 与BT_CALL_IND_STA 枚举的值判断
用于获取当前蓝牙电话的状态
*/
extern u8 get_call_status();
extern void user_cmd_ctrl_init(void *var);
/******当前连接的设备是jl测试盒**********/
extern bool get_remote_test_flag();
extern void set_remote_test_flag(u8 own_remote_test);
extern void bt_fast_test_handle_register(void (*handle)(void));
extern void bt_dut_test_handle_register(void (*handle)(u8));
extern void inquiry_result_handle_register(void (*handle)(char *name, u8 name_len, u8 *addr, u32 dev_class, char rssi));
/*个性化参数设置*/
/*用户调试设置地址，6个byte*/
extern void __set_bt_mac_addr(u8 *addr);
/*用户调试设置name,最长32个字符*/
extern void __set_host_name(const char *name, u8 len);
/*用户调试设置pin code*/
extern void __set_pin_code(const char *code);
/*该接口用于设置上电回连需要依次搜索设备的个数。*/
extern void __set_auto_conn_device_num(u8 num);
/*//回连的超时设置。ms单位。但是对手机发起的连接是没作用的*/
extern void __set_super_timeout_value(u16 time);
/*外部设置支持什么协议*/
extern void bt_cfg_default_init(u8 support);
/*设置电量显示发送更新的周期时间，为0表示关闭电量显示功能*/
extern void __bt_set_update_battery_time(u8 time);
/*给用户设置蓝牙支持连接的个数，主要用于控制控制可发现可连接和回连流程*/
extern void __set_user_ctrl_conn_num(u8 num);
/*提供接口外部设置要保留hfp不要蓝牙通话*/
extern void __set_disable_sco_flag(bool flag);
/*提供接口外部设置简易配对参数*/
extern void __set_simple_pair_param(u8 io_cap, u8 oob_data, u8 mitm);
/*有些自选接口用来实现个性化功能流程，回调函数注册，记得常来看看哟*/
extern void get_battery_value_register(int (*handle)(void)); /*电量发送时获取电量等级的接口注册*/
extern void music_vol_change_handle_register(void (*handle)(int vol), int (*handle2)(void)); /*手机更样机音乐模式的音量同步*/
extern void read_remote_name_handle_register(void (*handle)(u8 status, u8 *addr, u8 *name)); /*获取到名字后的回调函数接口注册函数*/
extern void spp_data_deal_handle_register(void (*handler)(u8 packet_type, u16 channel, u8 *packet, u16 size)); /*支持串口功能的数据处理接口*/
extern void discon_complete_handle_register(void (*handle)(u8 *addr, int reason)); /*断开或者连接上会调用的函数，给客户反馈信息*/
extern void update_bt_current_status(u8 *addr, u8 new_status, u8 conn_status);
extern u8 get_bt_connect_status(void);
extern u8 a2dp_get_status(void);
/*//回连的超时设置。ms单位。但是对手机发起的连接是没作用的*/
extern void __set_super_timeout_value(u16 time);
/*//回连page的超时设置。ms单位*/
extern void __set_page_timeout_value(u16 time);
/*上电自动搜索设备的个数*/
extern u8 get_current_poweron_memory_search_index(u8 *temp_mac_addr);
extern void clear_current_poweron_memory_search_index(u8 inc);
extern void __set_user_background_goback(u8 en);
extern bool user_sniff_check_req(u8 sniff_cnt_time);
extern int tws_updata_phone_wait_con_addr(u8 *addr);
extern int tws_updata_internal_addr(u8 *internal_addr_local, u8 *internal_addr_remote);
extern void bt_discon_complete_handle(u8 *addr, int reason);
extern bool is_1t2_connection(void);
extern u8 get_total_connect_dev(void);
extern u8 is_bt_conn_hfp_hangup(u8 *addr);
extern void infor_2_user_handle_register(int (*handle)(u8 *info, u16 len), u8 *buffer_ptr);
extern void bt_music_info_handle_register(void (*handler)(u8 type, u32 time, u8 *info, u16 len));
extern void set_bt_vm_interface(u32 vm_index, void *interface);
extern void bredr_stack_init(void);
extern u8 get_a2dp_decoder_status();
extern bool bt_api_conn_mode_check(u8 enable, u8 *addr);
extern u8 bt_api_enter_sniff_status_check(u16 time_cnt, u8 *addr);
extern void user_cmd_timer_init();
extern void remove_user_cmd_timer();
extern u8 get_auto_connect_state(u8 *addr);
extern u8 get_esco_coder_busy_flag();
extern u8 hci_standard_connect_check(void);
extern void set_stack_exiting(u8 exit);
extern int a2dp_media_packet_codec_type(u8 *data);
extern void lib_make_ble_address(u8 *ble_address, u8 *edr_address);
extern u8 connect_last_device_from_vm();
extern u8 hci_standard_connect_check(void);
extern void __bt_set_hid_independent_flag(bool flag);
extern bool get_esco_busy_flag();
extern int btstack_exit();
extern int sbc_energy_check(u8 *packet, u16 size);
extern int a2dp_source_init(void *buf, u16 len, int deal_flag);
extern int hfp_ag_buf_init(void *buf, int size, int deal_flag);
extern void __set_emitter_enable_flag(u8 flag);
extern void hci_cancel_inquiry();
extern u8 hci_standard_connect_check(void);
extern void __emitter_send_media_toggle(u8 *addr, u8 toggle);
extern u8 is_a2dp_source_dev_null();
extern u8 get_total_connect_dev(void);
extern u8 get_remote_dev_info_index();
extern u8 check_tws_le_aa(void);
extern u8 get_esco_coder_busy_flag();
extern void tws_api_set_connect_aa(int);
extern void tws_le_acc_generation_init(void);
extern void tws_api_clear_connect_aa();
extern void clear_sniff_cnt(void);
extern u8 delete_last_device_from_vm();
#define BD_CLASS_WEARABLE_HEADSET 0x240404/*ios10.2 display headset icon*/
#define BD_CLASS_HANDS_FREE 0x240408/*ios10.2 display bluetooth icon*/
#define BD_CLASS_MICROPHONE 0x240410
#define BD_CLASS_LOUDSPEAKER 0x240414
#define BD_CLASS_HEADPHONES 0x240418
#define BD_CLASS_CAR_AUDIO 0x240420
#define BD_CLASS_HIFI_AUDIO 0x240428
#define BD_CLASS_PHONEBOOK 0x340404
#define BD_CLASS_PAN_DEV 0X020118
#define BD_CLASS_MOUSE 0x002580
#define BD_CLASS_KEYBOARD 0x002540
#define BD_CLASS_KEYBOARD_MOUSE 0x0025C0
#define BD_CLASS_TRANSFER_HEALTH 0x10091C
extern void __change_hci_class_type(u32 class);
extern void __set_support_msbc_flag(bool flag);
extern void __set_support_aac_flag(bool flag);
/*设置1拖2时电话是否抢断标识*/
extern void __set_hfp_switch(u8 switch_en);
/*
*设置1拖2时电话是否恢复标识
*通话结束的时候，如果还有手机在通话，自动切到蓝牙端
*/
extern void __set_hfp_restore(u8 restore_en);
/*当前设备被打断时是否自动暂停*/
extern void __set_auto_pause_flag(u8 flag);
/*当前设备被打断时是否自动暂停*/
extern void __set_auto_pause_flag(u8 flag);
/*高级音频设置标志是否允许后者打断前者*/
extern void __set_music_break_in_flag(u8 flag);
/*高级音频打断检测数据包阈值设置*/
extern void __set_a2dp_sound_detect_counter(u8 sound_come, u8 sound_go);
/*pan的控制接口和发数接口,
addr指定就按指定的查找，NULL就默认正在使用那个
cmd 下面定义的宏用户可以使用
param 传参数需要的值或者data包的长度
data 传的是要发数据的包指针
*/
#define USER_PAN_CMD_SEND_DATA 0xff
int user_pan_send_cmd(u8 *addr, u32 cmd, u32 param, u8 *data);
enum {
BD_ESCO_IDLE = 0, /*当前没有设备通话中*/
BD_ESCO_BUSY_CURRENT, /*当前地址对应的设备通话中*/
BD_ESCO_BUSY_OTHER, /*通话中的设备非当前地址*/
};
extern u8 check_esco_state_via_addr(u8 *addr);
/*判断是否主动回连*/
extern u8 get_auto_connect_state(u8 *addr);
typedef struct __hid_sdp_info {
u16 vid_private;
u16 pid_private;
u16 ver_private;
u8 sub_class;
u8 country_code;
bool virtual_cable;
bool reconnect_initiate;
bool sdp_disable;
bool battery_power;
bool remote_wake;
bool normally_connectable;
bool boot_device;
u16 version;
u16 parser_version;
u16 profile_version;
u16 supervision_timeout;
u16 language;
u16 bt_string_offset;
u16 descriptor_len;
u8 *descriptor;
char *service_name;
char *service_description;
char *provide_name;
void (*sdp_request_respone_callback)(u8 type);
u8 *extra_buf;
u8 extra_len;
} hid_sdp_info_t;
typedef struct {
u16 chl_id;
u16 data_len;
u8 *data_ptr;
} hid_s_param_t;
extern u16 sdp_create_diy_device_ID_service(u8 *buffer, u16 buffer_size);
extern u16 sdp_create_diy_hid_service(u8 *buffer, u16 buffer_size, const u8 *hid_descriptor, u16 hid_descriptor_size);
u8 get_remote_vol_sync(void);
void set_start_search_spp_device(u8 spp);
u8 restore_remote_device_info_opt(bd_addr_t *mac_addr, u8 conn_device_num, u8 id);
u8 restore_remote_device_info_profile(bd_addr_t *mac_addr, u8 device_num, u8 id, u8 profile);
/*remote dev type*/
/*0:unknow,1-android,2:apple_inc,0x03-xiaomi*/
enum {
REMOTE_DEV_UNKNOWN = 0,
REMOTE_DEV_ANDROID ,
REMOTE_DEV_IOS ,
REMOTE_DEV_XIAOMI ,
};
u8 remote_dev_company_ioctrl(bd_addr_t dev_addr, u8 op_flag, u8 value);
u8 hci_standard_link_check(void);
extern void XM_status_update(u8 status);
#endif
Reference in New Issue Copy Permalink