KT24-1110_65E-HA-651B/include_lib/system/device/device_drive.h

191 lines
4.3 KiB
C
Raw Normal View History

2024-11-10 10:44:17 +00:00
#ifndef __DEVICE_DRIVE_H__
#define __DEVICE_DRIVE_H__
#include "typedef.h"
#include "errno-base.h"
#include "ioctl.h"
#ifndef __UBOOT
#ifndef _MANGO_OS_
#define _MANGO_OS_
#endif
#endif
#ifdef _MANGO_OS_
#include "os/os_api.h"
#else
#ifndef __UBOOT
#ifndef _WIN_DEBUG_
#define _WIN_DEBUG_
#endif
#endif
#ifdef _WIN_DEBUG_
#include <pthread.h>
typedef pthread_mutex_t OS_MUTEX;
typedef u32 OS_ERR;
#define OS_ERR_NONE 0
#else
typedef u32 OS_MUTEX, OS_ERR;
#define OS_ERR_NONE 0
#endif
#endif
#ifdef __cplusplus
extern "C" {
#endif
struct dev_mutex {
OS_MUTEX *write_mutex;
OS_MUTEX *read_mutex;
};
typedef enum _dev_type {
DEV_SDCRAD_0 = 0X10,
DEV_SDCRAD_1,
DEV_SDCRAD_2,
DEV_UDISK_H0,
DEV_UDISK_H1,
DEV_UDISK_F0,
DEV_NOR_FLASH,
DEV_NAND_FLASH,
DEV_STORAGE = 0x100,
DEV_LOGIC_DISK = 0x101,
DEV_USB_SLAVE,
DEV_USB_HOST,
DEV_HID = 0x200,
DEV_NET,
DEV_AUDIO,
DEV_ISP,
} dev_type;
// struct partition_table
// {
// int partition_addr;
// int partition_size;
// };
typedef struct DEV_IO {
const char name[8];
s32(*mount)(void *volatile parm);
s32(*unmount)();
s32(*read)(u8 *volatile buf, u32 addr, u32 len);
s32(*write)(u8 *volatile buf, u32 addr, u32 len);
s32(*ioctrl)(void *volatile parm, u32 cmd);
s32(*power)(u32 mod);
s32(*detect)(); //设备状态检测
struct dev_mutex *mutex;
dev_type device_type;
void *private_data;//设备私有属性,用来提供额外接口或者存储一些设备的特性
} dev_io_t;
//设备状态:
typedef enum dev_sta {
DEV_OFFLINE = 0, //--0 设备从在线切换到离线。
DEV_ONLINE = 1, //---1 设备从离线切换到在线。
DEV_HOLD = 2, //---2 其他值表示设备状态未改变。
DEV_POWER_ON = 0x10, // 0x10 开机
DEV_POWER_OFF, // 0x11 -关机
DEV_POWER_STANDBY, // 0x12 -待机
DEV_POWER_WAKEUP, // 0x13- 唤醒
} DEV_STA;
//设备错误代码:
typedef enum dev_err {
DEV_ERR_NONE = 0,
DEV_ERR_NOT_MOUNT,
DEV_ERR_OVER_CAPACITY,
DEV_ERR_UNKNOW_CLASS,
DEV_ERR_NOT_READY,//设备已经在线,但是没初始化完成
DEV_ERR_LUN,
DEV_ERR_TIMEOUT,
DEV_ERR_CMD_TIMEOUT,
DEV_ERR_READ_TIMEOUT,//0x08
DEV_ERR_WRITE_TIMEOUT,
DEV_ERR_OFFLINE,//0x0a
DEV_ERR_CRC,
DEV_ERR_CMD_CRC,
DEV_ERR_READ_CRC,
DEV_ERR_WRITE_CRC,
DEV_ERR_CONTROL_STALL,
DEV_ERR_RXSTALL,//0x10
DEV_ERR_TXSTALL,
DEV_ERR_CONTROL,
DEV_ERR_NOT_STORAGE,
DEV_ERR_INVALID_PATH,
DEV_ERR_INVALID_DATA,
DEV_ERR_OUTOFMEMORY,
DEV_ERR_HANDLE_FREE,
DEV_ERR_INVALID_HANDLE,//24
DEV_ERR_INVALID_BUF,
DEV_ERR_INUSE,
DEV_ERR_NO_READ,
DEV_ERR_NO_WRITE,
DEV_ERR_NO_IOCTL,
DEV_ERR_NO_POWER,
DEV_ERR_NOT_EXIST,
DEV_ERR_UNKNOW,
} DEV_ERR;
#define DEV_GENERAL_MAGIC 0xe0
//每个设备必须支持的命令
#define DEV_GET_STATUS _IOR(DEV_GENERAL_MAGIC,0xe0,u32) //获取设备状态在线、离线、power_on、power_off、standby、……
//设备不支持下面命令时返回 -ENOTTY
#define DEV_GET_BLOCK_SIZE _IOR(DEV_GENERAL_MAGIC,0xe1,u32) //获取存储设备的块大小
#define DEV_GET_BLOCK_NUM _IOR(DEV_GENERAL_MAGIC,0xe2,u32) //获取存储设备的块总数
#define DEV_GET_DEV_ID _IOR(DEV_GENERAL_MAGIC,0xe3,u32) //获取设备的ID。SD/TF 卡返回“sdtf”(0x73647466)
#define DEV_SECTOR_ERASE _IOW(DEV_GENERAL_MAGIC,0xe4,u32) //设备页擦除
#define DEV_BLOCK_ERASE _IOW(DEV_GENERAL_MAGIC,0xe5,u32) //设备块擦除
#define DEV_CHIP_ERASE _IOW(DEV_GENERAL_MAGIC,0xe6,u32) //设备擦除
#define DEV_GET_TYPE _IOR(DEV_GENERAL_MAGIC,0xe7,u32) //返回设备的dev_type
#define DEV_CHECK_WPSTA _IOR(DEV_GENERAL_MAGIC,0xe8,u32) //检测设备写保护状态,当参数为-1的时候返回设备的写包含状态0的时候解除写保护1的时候加上写保护
#define typecheck(type,x) \
({ type __dummy; \
typeof(x) __dummy2; \
(void)(&__dummy == &__dummy2); \
1; \
})
#ifndef time_after
#define time_after(a,b) (typecheck(u32, a) && \
typecheck(u32, b) && \
((s32)(b) - (s32)(a) < 0))
#endif
#ifndef time_before
#define time_before(a,b) time_after(b,a)
#endif
#ifdef __cplusplus
}
#endif
#endif