KT24-1110_65E-HA-651B/apps/soundbox/include/app_main.h
2024-11-10 18:44:17 +08:00

104 lines
3.6 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef APP_MAIN_H
#define APP_MAIN_H
typedef struct _APP_VAR {
s8 music_volume;
s8 music_volume_r;
s8 call_volume;
s8 call_volume_r;
s8 wtone_volume;
s8 wtone_volume_r;
u8 opid_play_vol_sync;
u8 aec_dac_gain;
u8 aec_mic_gain;
u8 aec_mode; //AEC模式,default:advance(diable(0), reduce(1), advance(2))
u8 ul_eq_en; //上行EQ使能,default:enable(disable(0), enable(1))
/*AGC*/
float ndt_fade_in; //单端讲话淡入步进default: 1.3f(0.1 ~ 5 dB)
float ndt_fade_out; //单端讲话淡出步进default: 0.7f(0.1 ~ 5 dB)
float dt_fade_in; //双端讲话淡入步进default: 1.3f(0.1 ~ 5 dB)
float dt_fade_out; //双端讲话淡出步进default: 0.7f(0.1 ~ 5 dB)
float ndt_max_gain; //单端讲话放大上限,default: 12.f(0 ~ 24 dB)
float ndt_min_gain; //单端讲话放大下限,default: 0.f(-20 ~ 24 dB)
float ndt_speech_thr; //单端讲话放大阈值,default: -50.f(-70 ~ -40 dB)
float dt_max_gain; //双端讲话放大上限,default: 12.f(0 ~ 24 dB)
float dt_min_gain; //双端讲话放大下限,default: 0.f(-20 ~ 24 dB)
float dt_speech_thr; //双端讲话放大阈值,default: -40.f(-70 ~ -40 dB)
float echo_present_thr; //单端双端讲话阈值,default:-70.f(-70 ~ -40 dB)
/*AEC*/
float aec_dt_aggress; //原音回音追踪等级, default: 1.0f(1 ~ 5)
float aec_refengthr; //进入回音消除参考值, default: -70.0f(-90 ~ -60 dB)
/*ES*/
float es_aggress_factor;//回音前级动态压制,越小越强,default: -3.0f(-1 ~ -5)
float es_min_suppress; //回音后级静态压制,越大越强,default: 4.f(0 ~ 10)
/*ANS*/
float ans_aggress; //噪声前级动态压制,越大越强default: 1.25f(1 ~ 2)
float ans_suppress; //噪声后级静态压制,越小越强default: 0.04f(0 ~ 1)
u8 rf_power;
u8 ble_rf_power;
u8 poweron_charge; //开机进充电标志
u8 goto_poweroff_flag;
u8 goto_poweroff_cnt;
u8 play_poweron_tone;
u8 remote_dev_company;
u8 siri_stu;
int auto_stop_page_scan_timer; //用于1拖2时有一台连接上后超过三分钟自动关闭Page Scan
volatile int auto_shut_down_timer;
volatile int wait_exit_timer;
u16 auto_off_time;
u16 warning_tone_v;
u16 poweroff_tone_v;
u32 start_time;
s8 usb_mic_gain;
u8 reverb_status; //用于tws+混响在pc模式时同步关闭混响, 0:非pc模式
u8 cycle_mode;
} APP_VAR;
typedef struct _BT_USER_PRIV_VAR {
//phone
u8 phone_ring_flag: 1;
u8 phone_num_flag: 1;
u8 phone_income_flag: 1;
u8 phone_call_dec_begin: 1;
u8 phone_con_sync_num_ring: 1;
u8 phone_con_sync_ring: 1;
u8 emitter_or_receiver: 2;
u16 get_phone_num_timecnt;
u8 inband_ringtone;
u8 phone_vol;
u16 phone_timer_id;
u8 last_call_type;
u8 income_phone_num[30];
u8 income_phone_len;
s32 auto_connection_counter;
s32 search_counter;
int auto_connection_timer;
u8 auto_connection_addr[6];
int tws_con_timer;
u8 tws_start_con_cnt;
u8 tws_conn_state;
bool search_tws_ing;
int sniff_timer;
bool fast_test_mode;
u8 set_call_vol_flag; /*有些客户希望通话默认给手机设置最大音量*/
} BT_USER_PRIV_VAR;
#define BT_EMITTER_EN 1
#define BT_RECEIVER_EN 2
typedef struct _BT_USER_COMM_VAR {
} BT_USER_COMM_VAR;
extern APP_VAR app_var;
extern BT_USER_PRIV_VAR bt_user_priv_var;
void app_main();
void vddiom_set_dynamic(u8 level);
#define earphone (&bt_user_priv_var)
#endif