KT25-0812_82A-UART/apps/common/usb/host/usb_storage.h

85 lines
2.0 KiB
C
Raw Normal View History

2025-08-12 10:09:23 +00:00
#ifndef __USB_STORAGE_H__
#define __USB_STORAGE_H__
#include "system/task.h"
#include "device/device.h"
#include "usb/scsi.h"
#include "usb_bulk_transfer.h"
#include "usb/host/usb_host.h"
/* u盘预读功能配置, 二选一
* 使 */
#define UDISK_READ_BIGBLOCK_ASYNC_ENABLE 0 //使能大扇区预读方式(不需要额外buf,速度比512预读慢10%)
#define UDISK_READ_512_ASYNC_ENABLE 1 //使能512Byte预读方式(需要额外的512byte buffer,速度比大扇区预读快10%)
/****************************/
#define UDISK_READ_ASYNC_BLOCK_NUM (16) //预读扇区数
//设备状态:
typedef enum usb_sta {
DEV_IDLE = 0,
DEV_INIT,
DEV_OPEN,
DEV_READ,
DEV_WRITE,
DEV_CLOSE,
DEV_SUSPEND,
} USB_STA ;
struct udisk_end_desc {
u8 host_epout;
u8 target_epout;
u8 host_epin;
u8 target_epin;
#if HUSB_MODE
u16 rxmaxp;
u16 txmaxp;
#endif
};
#define ENABLE_DISK_HOTPLUG 0
struct mass_storage {
OS_MUTEX mutex;
struct usb_scsi_cbw cbw;
struct usb_scsi_csw csw;
struct request_sense_data sense;
char *name;
struct read_capacity_data capacity[2];
u8 lun;
u8 curlun;
u8 dev_status;
u8 suspend_cnt;
u8 read_only;
u32 remain_len;
u32 prev_lba;
#if (UDISK_READ_BIGBLOCK_ASYNC_ENABLE || UDISK_READ_512_ASYNC_ENABLE)
u8 async_en;
u8 need_send_csw;
u8 *udisk_512_buf;
u32 async_prev_lba;
#endif
#if ENABLE_DISK_HOTPLUG
u8 media_sta_cur; //for card reader, card removable
u8 media_sta_prev;
int test_unit_ready_tick;
#endif
};
enum usb_async_mode {
BULK_ASYNC_MODE_EXIT = 0, //取消异步模式
BULK_ASYNC_MODE_ENTER, //异步512预读
BULK_ASYNC_MODE_SEM_PEND, //异步预读等待信号量
};
#define MASS_LBA_INIT (-2)
int usb_msd_parser(struct usb_host_device *host_dev, u8 interface_num, const u8 *pBuf);
int _usb_stor_async_wait_sem(struct usb_host_device *host_dev);
#endif