KT25-1015_AC695x_SDK310/apps/kaotings/kt.c

#include "kt.h"
#include "key_event_deal.h"
#include "music_player.h"

enum {
    KT_LED_IDLE = 0, /* 空闲慢闪 */
    KT_LED_PLAY,     /* 播放常亮 */
    KT_LED_FAIL,     /* 播放失败快闪 */
};

/* 定时器 50ms：慢闪 1s灭/1s亮，快闪 100ms灭/100ms亮 */
#define KT_LED_SLOW_HALF    20
#define KT_LED_FAST_HALF    2

typedef struct _kt_var_ {
    int kt_timer;
    int t_cnt;
    u8 led_mode;
    u8 active_ch; /* 1~6, 0=无按键播放会话 */
} _kt_var;

static _kt_var kt_var;
#define __this  (&kt_var)

static const char *const kt_file_tab[6] = {
    "/01.mp3", "/02.mp3", "/03.mp3", "/04.mp3", "/05.mp3", "/06.mp3",
};

static void kt_led_set_mode(u8 mode)
{
    __this->led_mode = mode;
    __this->t_cnt = 0;
    if (mode == KT_LED_PLAY) {
        BT_LED_ON();
    }
}

static void kt_audio_all_off(void)
{
    AUDIO_OUT_CH1_OFF();
    AUDIO_OUT_CH2_OFF();
    AUDIO_OUT_CH3_OFF();
    AUDIO_OUT_CH4_OFF();
}

static void kt_channel_outputs_off(u8 ch)
{
    switch (ch) {
    case 1:
        AUDIO_OUT_CH1_OFF();
        VOLTAGE_OUT_CH1_OFF();
        VLED_OUT_CH1_OFF();
        break;
    case 2:
        AUDIO_OUT_CH2_OFF();
        VOLTAGE_OUT_CH2_OFF();
        VLED_OUT_CH2_OFF();
        break;
    case 3:
        AUDIO_OUT_CH3_OFF();
        VOLTAGE_OUT_CH3_OFF();
        VLED_OUT_CH3_OFF();
        break;
    case 4:
        AUDIO_OUT_CH4_OFF();
        VOLTAGE_OUT_CH4_OFF();
        VLED_OUT_CH4_OFF();
        break;
    case 5:
        VLED_OUT_CH5_OFF();
        break;
    case 6:
        VLED_OUT_CH6_OFF();
        break;
    default:
        break;
    }
}

static void kt_channel_outputs_on(u8 ch)
{
    /* 音频通道互斥：先全关再开对应通道（仅 1~4 有音频/电压脚） */
    kt_audio_all_off();
    VOLTAGE_OUT_CH1_OFF();
    VOLTAGE_OUT_CH2_OFF();
    VOLTAGE_OUT_CH3_OFF();
    VOLTAGE_OUT_CH4_OFF();
    VLED_OUT_CH1_OFF();
    VLED_OUT_CH2_OFF();
    VLED_OUT_CH3_OFF();
    VLED_OUT_CH4_OFF();
    VLED_OUT_CH5_OFF();
    VLED_OUT_CH6_OFF();

    switch (ch) {
    case 1:
        AUDIO_OUT_CH1_ON();
        VOLTAGE_OUT_CH1_ON();
        VLED_OUT_CH1_ON();
        break;
    case 2:
        AUDIO_OUT_CH2_ON();
        VOLTAGE_OUT_CH2_ON();
        VLED_OUT_CH2_ON();
        break;
    case 3:
        AUDIO_OUT_CH3_ON();
        VOLTAGE_OUT_CH3_ON();
        VLED_OUT_CH3_ON();
        break;
    case 4:
        AUDIO_OUT_CH4_ON();
        VOLTAGE_OUT_CH4_ON();
        VLED_OUT_CH4_ON();
        break;
    case 5:
        /* 硬件无 AUDIO/VOLTAGE 通道5，仅 VLED */
        VLED_OUT_CH5_ON();
        break;
    case 6:
        /* 硬件无 AUDIO/VOLTAGE 通道6，仅 VLED */
        VLED_OUT_CH6_ON();
        break;
    default:
        break;
    }
}

void kt_boot_init(void)
{
    //CS8406 RST
    gpio_set_pull_down(IO_PORTA_06,0);
    gpio_set_pull_up(IO_PORTA_06,0);
    gpio_set_direction(IO_PORTA_06,0);
    gpio_set_output_value(IO_PORTA_06,0);

    //iis 双绑引脚高阻化
    gpio_set_pull_down(IO_PORTA_01,0);
    gpio_set_pull_up(IO_PORTA_01,0);
    gpio_set_direction(IO_PORTA_01,1);
    gpio_set_die(IO_PORTA_01,1);

    gpio_set_pull_down(IO_PORTA_05,0);
    gpio_set_pull_up(IO_PORTA_05,0);
    gpio_set_direction(IO_PORTA_05,1);
    gpio_set_die(IO_PORTA_05,1);

    //CS8406 TX EN
    gpio_set_pull_down(AUDIO_OUT_CHANNEL1,0);
    gpio_set_pull_up(AUDIO_OUT_CHANNEL1,0);
    gpio_set_direction(AUDIO_OUT_CHANNEL1,0);
    gpio_set_output_value(AUDIO_OUT_CHANNEL1,0);

    gpio_set_pull_down(AUDIO_OUT_CHANNEL2,0);
    gpio_set_pull_up(AUDIO_OUT_CHANNEL2,0);
    gpio_set_direction(AUDIO_OUT_CHANNEL2,0);
    gpio_set_output_value(AUDIO_OUT_CHANNEL2,0);

    gpio_set_pull_down(AUDIO_OUT_CHANNEL3,0);
    gpio_set_pull_up(AUDIO_OUT_CHANNEL3,0);
    gpio_set_direction(AUDIO_OUT_CHANNEL3,0);
    gpio_set_output_value(AUDIO_OUT_CHANNEL3,0);

    gpio_set_pull_down(AUDIO_OUT_CHANNEL4,0);
    gpio_set_pull_up(AUDIO_OUT_CHANNEL4,0);
    gpio_set_direction(AUDIO_OUT_CHANNEL4,0);
    gpio_set_output_value(AUDIO_OUT_CHANNEL4,0);

    //voltage output
    gpio_set_pull_down(VOLTAGE_OUT_CHANNEL1,0);
    gpio_set_pull_up(VOLTAGE_OUT_CHANNEL1,0);
    gpio_set_direction(VOLTAGE_OUT_CHANNEL1,0);
    gpio_set_output_value(VOLTAGE_OUT_CHANNEL1,0);

    gpio_set_pull_down(VOLTAGE_OUT_CHANNEL2,0);
    gpio_set_pull_up(VOLTAGE_OUT_CHANNEL2,0);
    gpio_set_direction(VOLTAGE_OUT_CHANNEL2,0);
    gpio_set_output_value(VOLTAGE_OUT_CHANNEL2,0);

    gpio_set_pull_down(VOLTAGE_OUT_CHANNEL3,0);
    gpio_set_pull_up(VOLTAGE_OUT_CHANNEL3,0);
    gpio_set_direction(VOLTAGE_OUT_CHANNEL3,0);
    gpio_set_output_value(VOLTAGE_OUT_CHANNEL3,0);

    gpio_set_pull_down(VOLTAGE_OUT_CHANNEL4,0);
    gpio_set_pull_up(VOLTAGE_OUT_CHANNEL4,0);
    gpio_set_direction(VOLTAGE_OUT_CHANNEL4,0);
    gpio_set_output_value(VOLTAGE_OUT_CHANNEL4,0);

    //vled output
    gpio_set_pull_down(VLED_OUT_CHANNEL1,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL1,0);
    gpio_set_direction(VLED_OUT_CHANNEL1,0);
    gpio_set_output_value(VLED_OUT_CHANNEL1,0);

    gpio_set_pull_down(VLED_OUT_CHANNEL2,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL2,0);
    gpio_set_direction(VLED_OUT_CHANNEL2,0);
    gpio_set_output_value(VLED_OUT_CHANNEL2,0);

    gpio_set_pull_down(VLED_OUT_CHANNEL3,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL3,0);
    gpio_set_direction(VLED_OUT_CHANNEL3,0);
    gpio_set_output_value(VLED_OUT_CHANNEL3,0);

    gpio_set_pull_down(VLED_OUT_CHANNEL4,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL4,0);
    gpio_set_direction(VLED_OUT_CHANNEL4,0);
    gpio_set_output_value(VLED_OUT_CHANNEL4,0);

    gpio_set_pull_down(VLED_OUT_CHANNEL5,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL5,0);
    gpio_set_direction(VLED_OUT_CHANNEL5,0);
    gpio_set_output_value(VLED_OUT_CHANNEL5,0);

    gpio_set_pull_down(VLED_OUT_CHANNEL6,0);
    gpio_set_pull_up(VLED_OUT_CHANNEL6,0);
    gpio_set_direction(VLED_OUT_CHANNEL6,0);
    gpio_set_output_value(VLED_OUT_CHANNEL6,0);

    //bt led
    gpio_set_pull_down(BT_LED_PIN,0);
    gpio_set_pull_up(BT_LED_PIN,0);
    gpio_set_direction(BT_LED_PIN,0);
    gpio_set_output_value(BT_LED_PIN,0);
}

static void timer_cb(void *priv)
{
    u8 half;

    if (__this->led_mode == KT_LED_PLAY) {
        BT_LED_ON();
        return;
    }

    half = (__this->led_mode == KT_LED_FAIL) ? KT_LED_FAST_HALF : KT_LED_SLOW_HALF;
    __this->t_cnt++;
    if (__this->t_cnt <= half) {
        BT_LED_OFF();
    } else if (__this->t_cnt <= (half * 2)) {
        BT_LED_ON();
    } else {
        __this->t_cnt = 0;
    }
}

static void start_time_base(u32 time_base_ms)
{
    if (__this->kt_timer) {
        sys_timer_del(__this->kt_timer);
    }
    __this->t_cnt = 0;
    __this->kt_timer = sys_timer_add(NULL, timer_cb, time_base_ms);
}

void kt_init(void)
{
    __this->active_ch = 0;
    kt_led_set_mode(KT_LED_IDLE);
    //CS8406 RST
    gpio_set_output_value(IO_PORTA_06, 1);
    /* 默认关闭各音频通道，按键播放时再打开对应通道 */
    kt_audio_all_off();
    start_time_base(50);
}

/* 播放结束/出错/拔卡：关闭对应输出，返回1表示是按键播放会话 */
int kt_music_play_end_handler(void)
{
    if (__this->active_ch == 0) {
        return 0;
    }
    printf("kt_music_play_end_handler ch=%d\n", __this->active_ch);
    kt_channel_outputs_off(__this->active_ch);
    __this->active_ch = 0;
    kt_led_set_mode(KT_LED_IDLE);
    return 1;
}

/*
 * 优先 sd1/0x.mp3，其次 udisk0/0x.mp3；
 * 成功则打开对应音频/电压/VLED，失败不做任何反应；
 * 播完由 kt_music_play_end_handler 关闭输出。
 */
int kt_key_event_handler(u16 key)
{
    u8 ch;
    int err;
    const char *path;

    if (key < KEY_USER_KEY_1 || key > KEY_USER_KEY_6) {
        return MUSIC_PLAYER_ERR_NULL;
    }

    ch = (u8)(key - KEY_USER_KEY_1 + 1);
    path = kt_file_tab[ch - 1];
    printf("kt_key_event_handler key=%d ch=%d path=%s\n", key, ch, path);

    /* 若上一首按键播放未结束，先关掉上一通道输出 */
    if (__this->active_ch) {
        kt_channel_outputs_off(__this->active_ch);
        __this->active_ch = 0;
    }

    err = music_player_play_by_path((char *)"sd1", path);
    if (err != MUSIC_PLAYER_SUCC) {
        err = music_player_play_by_path((char *)"udisk0", path);
    }

    if (err == MUSIC_PLAYER_SUCC) {
        kt_channel_outputs_on(ch);
        __this->active_ch = ch;
        kt_led_set_mode(KT_LED_PLAY);
        return MUSIC_PLAYER_SUCC;
    }

    /* 播放失败：通道不动作，BT_LED 快闪 */
    printf("kt play fail ch=%d err=%d\n", ch, err);
    kt_led_set_mode(KT_LED_FAIL);
    return MUSIC_PLAYER_ERR_NULL;
}