完成LED7驱动

.vscode/c_cpp_properties.json

@@ -128,7 +128,8 @@
                 "${workspaceFolder}/apps/soundbox/smartbox/file_transfer",
                 "${workspaceFolder}/apps/soundbox/smartbox/tuya",
                 "${workspaceFolder}/apps/soundbox/include/ui/color_led",
-                "C:/JL/pi32/pi32v2-include"
+                "C:/JL/pi32/pi32v2-include",
+                "${workspaceFolder}/apps/kaotings"
             ],
             "intelliSenseMode": "clang-x86",
             "name": "AC695N_soundbox"

.vscode/settings.json

@@ -0,0 +1,8 @@
+{
+    "files.associations": {
+        "tuya_le_multi_common.h": "c",
+        "mcpwm.h": "c",
+        "kt_fan_ac.h": "c",
+        "kt_led7.h": "c"
+    }
+}

Makefile

@@ -206,6 +206,7 @@ INCLUDES := \
 	-Iapps/soundbox/smartbox/file_transfer \
 	-Iapps/soundbox/smartbox/tuya \
 	-Iapps/soundbox/include/ui/color_led \
+	-Iapps/kaotings \
 	-I$(SYS_INC_DIR) \
 
 
@@ -376,6 +377,9 @@ c_SRC_FILES := \
 	apps/common/usb/usb_host_config.c \
 	apps/soundbox/aec/br23/audio_aec.c \
 	apps/soundbox/aec/br23/audio_aec_demo.c \
+	apps/kaotings/kt.c \
+	apps/kaotings/kt_led7.c \
+	apps/kaotings/kt_fan_ac.c \
 	apps/soundbox/app_main.c \
 	apps/soundbox/board/br23/board_ac6083a/board_ac6083a.c \
 	apps/soundbox/board/br23/board_ac6083a/key_table/adkey_table.c \

apps/kaotings/kt.c

@@ -0,0 +1,83 @@
+#include "kt.h"
+#include "key_event_deal.h"
+#include "asm/mcpwm.h"
+#include "kt_fan_ac.h"
+#include "kt_led7.h"
+
+void kt_boot_init(void)
+{
+    printf("kt_boot_init\n");
+    // 初始化GPIO PA Mute
+    gpio_set_pull_down(KT_CFG_PA_MUTE_PIN, 0);
+    gpio_set_pull_up(KT_CFG_PA_MUTE_PIN, 0);
+    gpio_set_direction(KT_CFG_PA_MUTE_PIN, 0);
+    PA_MUTE();
+
+    // 初始化GPIO USB Plug Detect
+    gpio_set_pull_down(KT_CFG_USB_PLUG_DET_PIN, 0);
+    gpio_set_pull_up(KT_CFG_USB_PLUG_DET_PIN, 0);
+    gpio_set_die(KT_CFG_USB_PLUG_DET_PIN, 1);
+    gpio_set_direction(KT_CFG_USB_PLUG_DET_PIN, 1);
+
+    // 初始化GPIO Vibration Switch
+    gpio_set_pull_down(KT_CFG_VIBRATION_SW_PIN, 0);
+    gpio_set_pull_up(KT_CFG_VIBRATION_SW_PIN, 0);
+    gpio_set_die(KT_CFG_VIBRATION_SW_PIN, 1);
+    gpio_set_direction(KT_CFG_VIBRATION_SW_PIN, 1);
+
+    // 初始化GPIO Front Fan
+    gpio_set_pull_down(KT_CFG_FRONT_FAN_PIN, 0);
+    gpio_set_pull_up(KT_CFG_FRONT_FAN_PIN, 0);
+    gpio_set_direction(KT_CFG_FRONT_FAN_PIN, 0);
+    gpio_set_output_value(KT_CFG_FRONT_FAN_PIN, 0);
+
+    // 初始化GPIO Rear Fan
+    gpio_set_pull_down(KT_CFG_REAR_FAN_PIN, 0);
+    gpio_set_pull_up(KT_CFG_REAR_FAN_PIN, 0);
+    gpio_set_direction(KT_CFG_REAR_FAN_PIN, 0);
+    gpio_set_output_value(KT_CFG_REAR_FAN_PIN, 0);
+
+    // 初始化GPIO LR Fan
+    gpio_set_pull_down(KT_CFG_LR_FAN_PIN, 0);
+    gpio_set_pull_up(KT_CFG_LR_FAN_PIN, 0);
+    gpio_set_die(KT_CFG_LR_FAN_PIN, 1);
+    gpio_set_direction(KT_CFG_LR_FAN_PIN, 0);
+    gpio_set_output_value(KT_CFG_LR_FAN_PIN, 0);
+    
+}
+void kt_init(void)
+{
+    printf("kt_init\n");
+    kt_led7_init();
+}
+
+u8 kt_key_event_filter_after(int key_event, int key_value)
+{
+    u8 ret = true;
+    switch (key_event)
+    {
+    case KEY_KT_FRONT_FAN:
+        printf("KEY_KT_FRONT_FAN = %d\n", key_value);
+        kt_fan_level_change(fan_type_front);
+        break;
+    case KEY_KT_REAR_FAN:
+        printf("KEY_KT_REAR_FAN = %d\n", key_value);
+        kt_fan_level_change(fan_type_rear);
+        break;
+    case KEY_KT_LR_FAN:
+        printf("KEY_KT_LR_FAN = %d\n", key_value);
+        kt_fan_level_change(fan_type_lr);
+        break;
+    case KEY_KT_AIR_COND:
+        printf("KEY_KT_AIR_COND = %d\n", key_value);
+        kt_fan_level_change(fan_type_ac);
+        break;
+    default:
+        printf("KEY_KT_DEFAULT = %d\n", key_value);
+        ret = false;
+        break;
+    }
+    return ret;
+
+    // return false;
+}

apps/kaotings/kt.h

@@ -0,0 +1,57 @@
+#ifndef __KT_H__
+#define __KT_H__
+
+#include "system/includes.h"
+
+#define KT_CFG_USB_PLUG_DET_PIN     IO_PORTB_03    //USB插拔检测引脚 检测到插入后,闪烁显示电量
+#define KT_CFG_VIBRATION_SW_PIN     IO_PORTB_04    //振动开关反馈引脚,一直摇动这里会有反应
+
+#define KT_CFG_PA_MUTE_PIN          IO_PORTB_00    //PA静音引脚,低开高关,默认硬件上拉
+#define PA_MUTE()                   gpio_set_output_value(KT_CFG_PA_MUTE_PIN, 1)
+#define PA_UNMUTE()                 gpio_set_output_value(KT_CFG_PA_MUTE_PIN, 0)
+
+
+
+#define KT_CFG_VBAT_DET_PIN         IO_PORTA_12    //电池电压ADC检测引脚
+
+/* 前风扇 档位循环以及数码管显示
+ L-0 L-1 L-2 L-3 L-4 L-5 L-6
+ 语音
+ 前风扇关闭 前风扇1档 前风扇2档 前风扇3档 前风扇4档 前风扇5档 前风扇6档
+*/
+#define KT_CFG_FRONT_FAN_PIN        IO_PORTB_05    //前风扇控制引脚 
+
+/* 后风扇 档位循环以及数码管显示
+ F-0 F-1 F-2 F-3 F-4 F-5 F-6
+ 语音
+ 后风扇关闭 后风扇1档 后风扇2档 后风扇3档 后风扇4档 后风扇5档 后风扇6档
+*/
+#define KT_CFG_REAR_FAN_PIN         IO_PORTB_06    //后风扇控制引脚
+
+/* 左右风扇 档位循环以及数码管显示
+ C-0 C-1 C-2 C-3 C-4 C-5 C-6
+ 语音
+ 左右风扇关闭 左右风扇1档 左右风扇2档 左右风扇3档 左右风扇4档 左右风扇5档 左右风扇6档
+*/
+#define KT_CFG_LR_FAN_PIN           IO_PORTA_10    //左右风扇控制引脚
+
+/* 空调 档位循环以及数码管显示
+ AC0 AC1 AC2
+空调已打开断续模式(AC1)->连续模式(AC2)->空调已关闭(AC0) 
+ 语音
+ 空调已打开断续模式 空调已打开连续模式 空调已关闭
+*/
+#define KT_CFG_AIR_COND_PIN         IO_PORTA_11    //空调控制
+
+/* LED 语音 数码管不显示,但是激活电量显示
+ 灯光已打开->爆闪模式->灯光已关闭
+*/
+#define KT_CFG_LED_PIN              IO_PORTB_02    //LED控制引脚
+
+
+void kt_boot_init(void);
+void kt_init(void);
+u8 kt_key_event_filter_after(int key_event,int key_value);
+
+
+#endif

apps/kaotings/kt_fan_ac.c

@@ -0,0 +1,109 @@
+#include "kt_fan_ac.h"
+#include "asm/mcpwm.h"
+#include "tone_player.h"
+
+
+typedef struct _kt_fan_ac_var_ {
+    kt_fan_level_type front_fan_level; //前风扇档位
+    kt_fan_level_type rear_fan_level; //后风扇档位
+    kt_fan_level_type lr_fan_level; //左右风扇档位
+    kt_ac_level_type ac_level; //空调档位
+} _kt_fan_ac_var;
+
+static _kt_fan_ac_var kt_fan_ac_var;
+#define __this  (&kt_fan_ac_var)
+
+const u32 fan_level_duty[7] = {0, 1500, 4000, 6000, 7000, 8000, 10000};
+const u32 ac_level_duty[3] = {0, 1500, 8000};
+
+const char *front_fan_level_tone[7] = {TONE_FFAN_L0, TONE_FFAN_L1, TONE_FFAN_L2, TONE_FFAN_L3, TONE_FFAN_L4, TONE_FFAN_L5, TONE_FFAN_L6};
+const char *rear_fan_level_tone[7] = {TONE_BFAN_L0, TONE_BFAN_L1, TONE_BFAN_L2, TONE_BFAN_L3, TONE_BFAN_L4, TONE_BFAN_L5, TONE_BFAN_L6};
+const char *lr_fan_level_tone[7] = {TONE_CFAN_L0, TONE_CFAN_L1, TONE_CFAN_L2, TONE_CFAN_L3, TONE_CFAN_L4, TONE_CFAN_L5, TONE_CFAN_L6};
+const char *ac_level_tone[3] = {TONE_AC_L0, TONE_AC_L1, TONE_AC_L2};
+
+
+
+void kt_fan_ac_init(void)
+{
+    //50KHz
+    //前风扇 PB5 TIMER3 硬件引脚
+    //后风扇 PB6
+    //左右风扇 PA10
+    //空调 PA11
+
+    __this->front_fan_level = fan_level_0;
+    __this->rear_fan_level = fan_level_0;
+    __this->lr_fan_level = fan_level_0;
+    __this->ac_level = ac_level_0;
+
+    timer_pwm_init(JL_TIMER3, 50000, 0, IO_PORTB_05, 0); //前风扇
+    timer_pwm_init(JL_TIMER2, 50000, 0, IO_PORTB_06, 1); //后风扇
+    timer_pwm_init(JL_TIMER1, 50000, 0, IO_PORTA_10, 2); //左右风扇
+    timer_pwm_init(JL_TIMER0, 50000, 0, IO_PORTA_11, 3); //空调
+}
+
+void kt_fan_level_tone_play(kt_fan_type fan)
+{
+    if (fan == fan_type_front)
+    {
+        tone_play(front_fan_level_tone[__this->front_fan_level], 0);
+    }
+    else if (fan == fan_type_rear)
+    {
+        tone_play(rear_fan_level_tone[__this->rear_fan_level], 0);
+    }
+    else if (fan == fan_type_lr)
+    {
+        tone_play(lr_fan_level_tone[__this->lr_fan_level], 0);
+    }
+    else
+    {
+        tone_play(ac_level_tone[__this->ac_level], 0);
+    }
+}
+
+
+void kt_fan_level_change(kt_fan_type fan)
+{
+    if (fan == fan_type_front)
+    {
+        __this->front_fan_level++;
+        if (__this->front_fan_level > fan_level_6)
+        {
+            __this->front_fan_level = fan_level_0;
+        }
+        kt_fan_level_tone_play(fan_type_front);
+        set_timer_pwm_duty(JL_TIMER3, __this->front_fan_level * 1000);
+    }
+    else if (fan == fan_type_rear)
+    {
+        __this->rear_fan_level++;
+        if (__this->rear_fan_level > fan_level_6)
+        {
+            __this->rear_fan_level = fan_level_0;
+        }
+        kt_fan_level_tone_play(fan_type_rear);
+        set_timer_pwm_duty(JL_TIMER2, __this->rear_fan_level * 1000);
+    }
+    else if (fan == fan_type_lr)
+    {
+        __this->lr_fan_level++;
+        if (__this->lr_fan_level > fan_level_6)
+        {
+            __this->lr_fan_level = fan_level_0;
+        }
+        kt_fan_level_tone_play(fan_type_lr);
+        set_timer_pwm_duty(JL_TIMER1, __this->lr_fan_level * 1000);
+    }
+    else
+    {
+        __this->ac_level++;
+        if (__this->ac_level > ac_level_2)
+        {
+            __this->ac_level = ac_level_0;
+        }
+        kt_fan_level_tone_play(fan_type_ac);
+        set_timer_pwm_duty(JL_TIMER0, __this->ac_level * 1000);
+    }
+    
+}

apps/kaotings/kt_fan_ac.h

@@ -0,0 +1,37 @@
+#ifndef __KT_FAN_AC_H__
+#define __KT_FAN_AC_H__
+
+#include "system/includes.h"
+#include "kt.h"
+
+
+
+typedef enum {
+    ac_level_0 = 0, //空调已关闭(AC0) 
+    ac_level_1 = 1, //空调已打开断续模式(AC1) 
+    ac_level_2 = 2, //空调已打开连续模式(AC2) 
+} kt_ac_level_type;
+
+typedef enum {
+    fan_level_0 = 0, //风扇关闭 0%占空比,低电平
+    fan_level_1 = 1, //风扇1档  15%占空比
+    fan_level_2 = 2, //风扇2档  40%占空比
+    fan_level_3 = 3, //风扇3档  60%占空比
+    fan_level_4 = 4, //风扇4档  70%占空比
+    fan_level_5 = 5, //风扇5档  80%占空比
+    fan_level_6 = 6, //风扇6档  100%占空比
+} kt_fan_level_type;
+
+typedef enum {
+    fan_type_front = 0, //前风扇
+    fan_type_rear = 1, //后风扇
+    fan_type_lr = 2, //左右风扇
+    fan_type_ac = 3, //空调
+} kt_fan_type;
+
+
+void kt_fan_ac_init(void);
+void kt_fan_level_change(kt_fan_type fan);
+
+
+#endif

apps/kaotings/kt_led7.c

@@ -0,0 +1,424 @@
+/*
+ * kt_led7.c — 硬件扫描与段码
+ *
+ * 与 kt_led7.h 中 L7～L14 的对应关系：
+ *   L7  → 本文件 kt_led7_scan() 六相状态机（case 0～5）
+ *   L8  → LED_NUMBER / LED_LARGE_LETTER / LED_SMALL_LETTER
+ *   L9～L12 → 由 kt_led7_show_* 填充缓冲后体现（当前为 stub，需与 kt_fan_ac 档位同步）
+ *   L13 → show_time / urgent / 闪烁（待与 disp_buf、策略层补全）
+ *   L14 → USB/电量/灯光等由上层调用 show 接口让路或关显
+ *
+ * 说明：逻辑段与 PCB 段的映射见 case 内注释（如 L38-L47 段映射）。
+ */
+#include "kt_led7.h"
+#include "system/includes.h"
+#include "system/timer.h"
+#include "app_power_manage.h"
+
+struct ui_led7_env {
+    u8 init;
+    u8 cnt;
+    struct {
+        u8 seg[3];
+        u8 dp1;
+        u8 dp2;
+    } disp_buf;
+};
+
+static struct ui_led7_env _led7_env = {0};
+#define __this (&_led7_env)
+
+/* 扫描里用 b[] 表示三位逻辑段码；闪烁关显时置位 */
+static u8 blink_blank;
+#define b (__this->disp_buf.seg)
+
+#define KT_LED7_BAT_HOLD_SEC_DEFAULT  60u
+
+typedef enum {
+    KT_LED7_MODE_OFF = 0,
+    KT_LED7_MODE_BATTERY,
+    KT_LED7_MODE_TEMP,
+} kt_led7_mode_t;
+
+static kt_led7_mode_t led7_ui_mode;
+static u32 led7_bat_sec_remain;
+static u32 led7_temp_sec_remain;
+static u16 led7_ui_1s_timer_id;
+static u8 led7_ui_1s_timer_armed;
+
+static void kt_led7_apply_blank(void);
+static void kt_led7_apply_battery_percent(void);
+static void kt_led7_ui_1s_tick(void *priv);
+static u8 kt_led7_seg_from_char(u8 c);
+
+
+const struct led7_pin6 led7_pin = {
+    .pin = {IO_PORTC_00, IO_PORTC_01, IO_PORTC_02, IO_PORTC_03, IO_PORTC_04, IO_PORTC_05}};
+
+/* 字模与 cpu/br23/ui_driver/LED_1888/LED1888.c 一致；scan 里用 LED_A..G 选段 */
+static const u8 LED_NUMBER[10] = {
+    (u8)(LED_A | LED_B | LED_C | LED_D | LED_E | LED_F),         /* '0' */
+    (u8)(LED_B | LED_C),                                         /* '1' */
+    (u8)(LED_A | LED_B | LED_D | LED_E | LED_G),                 /* '2' */
+    (u8)(LED_A | LED_B | LED_C | LED_D | LED_G),                 /* '3' */
+    (u8)(LED_B | LED_C | LED_F | LED_G),                         /* '4' */
+    (u8)(LED_A | LED_C | LED_D | LED_F | LED_G),                 /* '5' */
+    (u8)(LED_A | LED_C | LED_D | LED_E | LED_F | LED_G),         /* '6' */
+    (u8)(LED_A | LED_B | LED_C),                                 /* '7' */
+    (u8)(LED_A | LED_B | LED_C | LED_D | LED_E | LED_F | LED_G), /* '8' */
+    (u8)(LED_A | LED_B | LED_C | LED_D | LED_F | LED_G),         /* '9' */
+};
+
+static const u8 LED_LARGE_LETTER[26] = {
+    0x77, 0x40, 0x39, 0x3f, 0x79, ///< ABCDE
+    0x71, 0x40, 0x76, 0x06, 0x40, ///< FGHIJ
+    0x40, 0x38, 0x40, 0x37, 0x3f, ///< KLMNO
+    0x73, 0x40, 0x50, 0x6d, 0x78, ///< PQRST
+    0x3e, 0x3e, 0x40, 0x76, 0x40, ///< UVWXY
+    0x40                          ///< Z
+};
+
+static const u8 LED_SMALL_LETTER[26] = {
+    0x77, 0x7c, 0x58, 0x5e, 0x79, ///< abcde
+    0x71, 0x40, 0x40, 0x40, 0x40, ///< fghij
+    0x40, 0x38, 0x40, 0x54, 0x5c, ///< klmno
+    0x73, 0x67, 0x50, 0x40, 0x78, ///< pqrst
+    0x3e, 0x3e, 0x40, 0x40, 0x40, ///< uvwxy
+    0x40                          ///< z
+};
+
+#define PIN1_H gpio_direction_output(led7_pin.pin[0], 1)
+#define PIN1_L gpio_direction_output(led7_pin.pin[0], 0)
+#define PIN2_H gpio_direction_output(led7_pin.pin[1], 1)
+#define PIN2_L gpio_direction_output(led7_pin.pin[1], 0)
+#define PIN3_H gpio_direction_output(led7_pin.pin[2], 1)
+#define PIN3_L gpio_direction_output(led7_pin.pin[2], 0)
+#define PIN4_H gpio_direction_output(led7_pin.pin[3], 1)
+#define PIN4_L gpio_direction_output(led7_pin.pin[3], 0)
+#define PIN5_H gpio_direction_output(led7_pin.pin[4], 1)
+#define PIN5_L gpio_direction_output(led7_pin.pin[4], 0)
+#define PIN6_H gpio_direction_output(led7_pin.pin[5], 1)
+#define PIN6_L gpio_direction_output(led7_pin.pin[5], 0)
+
+/* 与 LED1888_init() 相同：全部脚置为输入高阻，换相前消隐，避免输出全高仍串亮(全显) */
+static void kt_led7_led_gpio_input_all(void)
+{
+    u8 i;
+    for (i = 0; i < 6; i++) {
+        u8 port = led7_pin.pin[i];
+        if (port != 255) {
+            gpio_set_pull_down(port, 0);
+            gpio_set_pull_up(port, 0);
+            gpio_set_direction(port, 1); /* 1=输入 */
+        }
+    }
+}
+
+void hw_init(void)
+{
+    kt_led7_led_gpio_input_all();
+}
+
+void kt_led7_scan(void *param)
+{
+    /* LED1888_6p_scan 在 switch 前调用 LED1888_init()，此处等同 */
+    kt_led7_led_gpio_input_all();
+
+    switch (__this->cnt)
+    {
+        case 0:
+            PIN1_H;
+            if (b[2] & LED_A)
+            {
+                PIN6_L;
+            }
+            if (b[2] & LED_G)
+            {
+                PIN5_L;
+            }
+            break;
+        case 1:
+            PIN2_H;
+            if (b[0] & LED_A)
+            {
+                PIN3_L;
+            }
+            if (b[0] & LED_B)
+            {
+                PIN4_L;
+            }
+            if (b[0] & LED_D)
+            {
+                PIN6_L;
+            }
+            if (b[0] & LED_E)
+            {
+                PIN5_L;
+            }
+            if (b[0] & LED_H) //DP
+            {
+                PIN1_L;
+            }
+            
+            break;
+        case 2:
+            PIN3_H;
+            if (b[0] & LED_F)
+            {
+                PIN2_L;
+            }
+            if (b[1] & LED_B)
+            {
+                PIN5_L;
+            }
+            if (b[1] & LED_D)
+            {
+                PIN4_L;
+            }
+            if (b[2] & LED_B)
+            {
+                PIN6_L;
+            }
+            if (b[1] & LED_H) //DP
+            {
+                PIN1_L;
+            }
+            break;
+        case 3:
+            PIN4_H;
+            if (b[0] & LED_G)
+            {
+                PIN2_L;
+            }
+            if (b[1] & LED_C)
+            {
+                PIN5_L;
+            }
+            if (b[1] & LED_F)
+            {
+                PIN3_L;
+            }
+            if (b[2] & LED_E)
+            {
+                PIN6_L;
+            }            
+            break;
+        case 4:
+            PIN5_H;
+            if (b[0] & LED_C)
+            {
+                PIN2_L;
+            }
+            if (b[1] & LED_A)
+            {
+                PIN4_L;
+            }
+            if (b[2] & LED_C)
+            {
+                PIN6_L;
+            }
+            if (b[2] & LED_G)
+            {
+                PIN3_L;
+            }
+            break;
+        case 5:
+            PIN6_H;
+            if (b[1] & LED_E)
+            {
+                PIN3_L;
+            }
+            if (b[2] & LED_D)
+            {
+                PIN4_L;
+            }
+            if (b[2] & LED_F)
+            {
+                PIN5_L;
+            }
+            break;
+        default:
+            break;
+    }
+    __this->cnt++;
+    if (__this->cnt == 6)
+    {
+        __this->cnt = 0;
+    }
+}
+
+
+static void kt_led7_set_digits(u8 d0, u8 d1, u8 d2, u8 dp1, u8 dp2)
+{
+    b[0] = LED_NUMBER[d0 % 10];
+    b[1] = LED_NUMBER[d1 % 10];
+    b[2] = LED_NUMBER[d2 % 10];
+    __this->disp_buf.dp1 = dp1;
+    __this->disp_buf.dp2 = dp2;
+    blink_blank = 0;
+}
+
+static void kt_led7_apply_blank(void)
+{
+    b[0] = 0;
+    b[1] = 0;
+    b[2] = 0;
+    __this->disp_buf.dp1 = 0;
+    __this->disp_buf.dp2 = 0;
+    blink_blank = 0;
+}
+
+static void kt_led7_apply_battery_percent(void)
+{
+    u8 p = get_vbat_percent();
+    if (p > 100) {
+        p = 100;
+    }
+    kt_led7_set_digits((u8)(p / 100), (u8)((p / 10) % 10), (u8)(p % 10), 0, 0);
+}
+
+static u8 kt_led7_seg_from_char(u8 c)
+{
+    if (c == '-') {
+        return LED_G;
+    }
+    if (c >= '0' && c <= '9') {
+        return LED_NUMBER[c - '0'];
+    }
+    if (c >= 'A' && c <= 'Z') {
+        return LED_LARGE_LETTER[c - 'A'];
+    }
+    if (c >= 'a' && c <= 'z') {
+        return LED_SMALL_LETTER[c - 'a'];
+    }
+    return 0;
+}
+
+static void kt_led7_ui_1s_tick(void *priv)
+{
+    (void)priv;
+    if (led7_ui_mode == KT_LED7_MODE_TEMP) {
+        if (led7_temp_sec_remain > 0) {
+            led7_temp_sec_remain--;
+        }
+        if (led7_temp_sec_remain == 0) {
+            led7_ui_mode = KT_LED7_MODE_BATTERY;
+            led7_bat_sec_remain = KT_LED7_BAT_HOLD_SEC_DEFAULT;
+            kt_led7_apply_battery_percent();
+        }
+    } else if (led7_ui_mode == KT_LED7_MODE_BATTERY) {
+        if (led7_bat_sec_remain > 0) {
+            led7_bat_sec_remain--;
+            kt_led7_apply_battery_percent();
+        }
+        if (led7_bat_sec_remain == 0) {
+            led7_ui_mode = KT_LED7_MODE_OFF;
+            kt_led7_apply_blank();
+        }
+    }
+}
+
+void kt_led7_battery_show_restart(void)
+{
+    led7_ui_mode = KT_LED7_MODE_BATTERY;
+    led7_bat_sec_remain = KT_LED7_BAT_HOLD_SEC_DEFAULT;
+    kt_led7_apply_battery_percent();
+}
+
+void kt_led7_temp_show_number(u16 number, u32 sec)
+{
+    u32 s = sec ? sec : 1;
+    u16 n = number % 1000;
+    kt_led7_set_digits((u8)(n / 100), (u8)((n / 10) % 10), (u8)(n % 10), 0, 0);
+    led7_ui_mode = KT_LED7_MODE_TEMP;
+    led7_temp_sec_remain = s;
+}
+
+void kt_led7_temp_show_string(const u8 *str, u32 sec)
+{
+    u32 s = sec ? sec : 1;
+    u8 c0 = ' ', c1 = ' ', c2 = ' ';
+    if (str) {
+        if (str[0]) {
+            c0 = str[0];
+        }
+        if (str[1]) {
+            c1 = str[1];
+        }
+        if (str[2]) {
+            c2 = str[2];
+        }
+    }
+    b[0] = kt_led7_seg_from_char(c0);
+    b[1] = kt_led7_seg_from_char(c1);
+    b[2] = kt_led7_seg_from_char(c2);
+    __this->disp_buf.dp1 = 0;
+    __this->disp_buf.dp2 = 0;
+    blink_blank = 0;
+    led7_ui_mode = KT_LED7_MODE_TEMP;
+    led7_temp_sec_remain = s;
+}
+
+void kt_led7_show_number(u32 show_time, u8 urgent, u16 number, u8 dp1, u8 dp2)
+{
+    (void)urgent;
+    u32 sec = show_time ? show_time : 1;
+    u16 n = number % 1000;
+    kt_led7_set_digits((u8)(n / 100), (u8)((n / 10) % 10), (u8)(n % 10), dp1, dp2);
+    led7_ui_mode = KT_LED7_MODE_TEMP;
+    led7_temp_sec_remain = sec;
+}
+
+void kt_led7_show_string(u32 show_time, u8 urgent, const u8 *str, u8 dp1, u8 dp2)
+{
+    (void)urgent;
+    u32 sec = show_time ? show_time : 1;
+    u8 c0 = ' ', c1 = ' ', c2 = ' ';
+    if (str) {
+        if (str[0]) {
+            c0 = str[0];
+        }
+        if (str[1]) {
+            c1 = str[1];
+        }
+        if (str[2]) {
+            c2 = str[2];
+        }
+    }
+    b[2] = kt_led7_seg_from_char(c0);
+    b[1] = kt_led7_seg_from_char(c1);
+    b[0] = kt_led7_seg_from_char(c2);
+    __this->disp_buf.dp1 = dp1;
+    __this->disp_buf.dp2 = dp2;
+    blink_blank = 0;
+    led7_ui_mode = KT_LED7_MODE_TEMP;
+    led7_temp_sec_remain = sec;
+}
+
+void kt_led7_show_u_volume(u8 vol_level, u32 show_time)
+{
+    u8 buf[4];
+    u8 v = vol_level > 99 ? 99 : vol_level;
+    buf[2] = 'U';
+    buf[1] = (u8)('0' + (v / 10));
+    buf[0] = (u8)('0' + (v % 10));
+    buf[3] = 0;
+    kt_led7_show_string(show_time ? show_time : 1, 0, buf, 0, 0);
+}
+
+void kt_led7_init(void)
+{
+    printf("kt_led7_init\n");
+    hw_init();
+    __this->cnt = 0;
+    __this->init = 1;
+    if (!led7_ui_1s_timer_armed) {
+        led7_ui_1s_timer_id = sys_timer_add(NULL, kt_led7_ui_1s_tick, 1000);
+        if (led7_ui_1s_timer_id) {
+            led7_ui_1s_timer_armed = 1;
+        }
+    }
+    /* 欢迎画面 5s，结束后由 kt_led7_ui_1s_tick 切回电量显示 */
+    kt_led7_temp_show_string((const u8 *)"HI", 5);
+    sys_s_hi_timer_add(NULL, kt_led7_scan, 2); /* 2ms */
+}

apps/kaotings/kt_led7.h

@@ -0,0 +1,102 @@
+#ifndef __KT_LED7_H__
+#define __KT_LED7_H__
+
+#include "system/includes.h"
+#include "kt.h"
+
+/*
+ * =============================================================================
+ * kt_led7 架构说明（与产品功能条目 L7～L14 对应）
+ * =============================================================================
+ *
+ * 硬件层
+ *   - 3 位共阴/动态扫描 + 2 个小数点，6 根位选/公共线 + 段线，由 6 个 GPIO 分时拉低选通
+ *   - 段逻辑与 PCB 走线存在交叉，逻辑段 A～G/DP 经映射后写入显示缓冲（见 kt_led7.c 注释）
+ *
+ * 时基层
+ *   - 扫描回调 kt_led7_scan 由 usr_timer（sys_s_hi_timer_add，约 2ms）触发，6 相轮转完成一轮刷新
+ *
+ * 数据层
+ *   - 显示缓冲：每位 1 字节段码 + dp1/dp2；业务侧只写“逻辑段码”，扫描里做线序映射
+ *
+ * 策略层（kt_led7_show_* 入参）
+ *   - show_time：显示保持时间；urgent：高优先级插入；闪烁/抢占规则见下表 L13
+ *
+ * -----------------------------------------------------------------------------
+ * 功能条目 L7～L14（与 kt.h 中风扇/空调/灯光/电量等业务一致）
+ * -----------------------------------------------------------------------------
+ * L7  动态扫描显示：分时选通，避免常亮串扰（扫描状态机在 kt_led7_scan）
+ * L8  字符集：数字 0～9 + 字母（用于前缀 L / F / C 及 AC 等缩写）
+ * L9  前风扇状态可视化：与「L-0～L-6」一致，对应 kt_fan_ac 前风扇档位 fan_level_0～6
+ * L10 后风扇状态可视化：与「F-0～F-6」一致，对应后风扇档位
+ * L11 左右风扇状态可视化：与「C-0～C-6」一致，对应左右风扇档位
+ * L12 空调状态可视化：与「AC0 / AC1 / AC2」一致，对应断续/连续/关闭
+ * L13 显示策略：紧急插入(urgent)、可编程显示时长(show_time)、闪烁(dp/全闪)、
+ *              高优先级打断后低优先级计时暂停不清零（见本文件历史注释）
+ * L14 联动：USB 插拔电量提示、LED 灯光模式等仅语音/灯控时数码管可关闭或让路给 L13 高优先级条
+ *
+ * 调用关系（建议）
+ *   - 档位变更：kt_fan_level_change() → 业务调用 kt_led7_show_string / kt_led7_show_number 更新缓冲
+ *   - 初始化：kt_boot_init / kt_init 路径中调用 kt_led7_init() 注册扫描定时器
+ * =============================================================================
+ */
+
+ /**
+  * 脚位：脚 N = led7_pin[N-1]，对应 IO_PORTC_0(N-1)（脚1=PC0 … 脚6=PC5）。
+  * 「XHYL」= 该扫描相内脚 X 高、脚 Y 低（与 kt_led7_scan 中 PINx_L/H 一致）。
+  *
+  * 下表为实测；「物理段A～G」与缓冲区里的 LED_A～G **不是**一一同名，同一物理段可能落在
+  * b[0..2]&LED_x 的不同 x 上。B2 全段与代码分支对应已核对并写在 kt_led7.c kt_led7_scan()；
+  * B0/B1 各段与每个 if(b[0|1|2]&LED_*) 的逐项注释也在该函数内（与上表同一编号）。
+  *
+  * B2（b[2]，百位）实测：
+  *     A:2H3L  B:2H4L  C:5H2L  D:2H6L  E:2H5L  F:3H2L  G:4H2L  DP:2H1L
+  * B1（b[1]，十位）实测：
+  *     A:5H4L  B:3H5L  C:4H5L  D:3H4L  E:6H3L  F:4H3L  G:5H3L  DP:3H1L
+  * B0（b[0]，个位）实测：
+  *     A:1H6L  B:3H6L  C:5H6L  D:6H4L  E:4H6L  F:6H5L  G:1H5L  DP:NONE
+  */
+
+/**
+ * 动态数码管扫描模块（实现见上 L7～L14）
+ * 用于显示数字和字符
+ * 支持紧急插入显示(高优先级显示)
+ * 支持闪烁显示
+ * 支持各种显示时间设置
+ * 高优先级显示打断低优先级显示后,低优先级时间不清零,继续计数
+ */
+
+#define LED_A   BIT(0)
+#define LED_B	BIT(1)
+#define LED_C	BIT(2)
+#define LED_D	BIT(3)
+#define LED_E	BIT(4)
+#define LED_F	BIT(5)
+#define LED_G	BIT(6)
+#define LED_H	BIT(7)
+
+struct led7_pin6 {
+    u8 pin[6];
+};
+
+void kt_led7_init(void);
+
+/** 正常电量显示：从当前时刻起再显示 60s（与临时显示结束后的行为一致） */
+void kt_led7_battery_show_restart(void);
+
+/**
+ * 临时显示（高优先级）：打断当前电量或上一次临时显示；sec 为持续秒数，0 按 1 秒处理。
+ */
+void kt_led7_temp_show_number(u16 number, u32 sec);
+void kt_led7_temp_show_string(const u8 *str, u32 sec);
+
+/**
+ * 临时显示：show_time 为持续秒数；urgent 预留（当前与 temp 等同，均抢占）。
+ */
+void kt_led7_show_number(u32 show_time, u8 urgent, u16 number, u8 dp1, u8 dp2);
+void kt_led7_show_string(u32 show_time, u8 urgent, const u8 *str, u8 dp1, u8 dp2);
+
+/** 音量提示：三位数码管显示 U + 两位数字（如 U15），表示「U-音量」，持续 show_time 秒 */
+void kt_led7_show_u_volume(u8 vol_level, u32 show_time);
+
+#endif

apps/soundbox/board/br23/board_ac695x_demo/board_ac695x_demo.c

@@ -501,7 +501,7 @@ LED7_PLATFORM_DATA_BEGIN(led7_data)
     .pin_cfg.pin7.pin[3] = IO_PORTC_03,
     .pin_cfg.pin7.pin[4] = IO_PORTC_04,
     .pin_cfg.pin7.pin[5] = IO_PORTC_05,
-    .pin_cfg.pin7.pin[6] = IO_PORTB_02,
+    .pin_cfg.pin7.pin[6] = -1,
 #endif
 LED7_PLATFORM_DATA_END()
 
@@ -798,7 +798,7 @@ struct port_wakeup port0 = {
     .pullup_down_enable = ENABLE,                            //配置I/O 内部上下拉是否使能
     .edge       = FALLING_EDGE,                            //唤醒方式选择,可选：上升沿\下降沿
     .attribute  = BLUETOOTH_RESUME,                        //保留参数
-    .iomap      = IO_PORTA_10,                             //唤醒口选择
+    .iomap      = IO_PORTB_01,                             //唤醒口选择
 };
 
 /* RTC PR0 PR1 唤醒 */

apps/soundbox/board/br23/board_ac695x_demo/board_ac695x_demo_cfg.h

@@ -375,7 +375,7 @@ DAC硬件上的连接方式,可选的配置：
     DAC_OUTPUT_FRONT_LR_REAR_LR    四声道输出
 */
 //#define TCFG_AUDIO_DAC_CONNECT_MODE    DAC_OUTPUT_FRONT_LR_REAR_LR
-#define TCFG_AUDIO_DAC_CONNECT_MODE   DAC_OUTPUT_LR
+#define TCFG_AUDIO_DAC_CONNECT_MODE   DAC_OUTPUT_MONO_L
 // #define TCFG_AUDIO_DAC_CONNECT_MODE    DAC_OUTPUT_MONO_LR_DIFF
 
 /*通话降噪模式配置*/
@@ -394,7 +394,7 @@ DAC硬件上的连接方式,可选的配置：
 #define AUDIO_OUTPUT_WAY            AUDIO_OUTPUT_WAY_DAC
 #define LINEIN_INPUT_WAY            LINEIN_INPUT_WAY_ADC //LINEIN_INPUT_WAY_ANALOG
 
-#define AUDIO_OUTPUT_AUTOMUTE       0//ENABLE
+#define AUDIO_OUTPUT_AUTOMUTE       1//ENABLE
 #define DAC_AUTO_HIGH_Z_EN          DISABLE         //处理直推串音问题, 隔直不要开
 
 /*
@@ -469,9 +469,9 @@ DAC硬件上的连接方式,可选的配置：
 //*********************************************************************************//
 //                                  UI 配置                                        //
 //*********************************************************************************//
-#define TCFG_UI_ENABLE 						ENABLE_THIS_MOUDLE 	//UI总开关
-#define CONFIG_UI_STYLE                     STYLE_JL_LED7
-#define TCFG_UI_LED7_ENABLE 			 	ENABLE_THIS_MOUDLE 	//UI使用LED7显示
+#define TCFG_UI_ENABLE 						DISABLE_THIS_MOUDLE 	//UI总开关
+//#define CONFIG_UI_STYLE                     STYLE_JL_LED7
+#define TCFG_UI_LED7_ENABLE 			 	DISABLE_THIS_MOUDLE 	//UI使用LED7显示
 // #define TCFG_UI_LCD_SEG3X9_ENABLE 		ENABLE_THIS_MOUDLE 	//UI使用LCD段码屏显示
 // #define TCFG_LCD_ST7735S_ENABLE	        ENABLE_THIS_MOUDLE
 // #define TCFG_LCD_ST7789VW_ENABLE	        ENABLE_THIS_MOUDLE
@@ -504,7 +504,7 @@ DAC硬件上的连接方式,可选的配置：
 //*********************************************************************************//
 //                                  EQ配置                                         //
 //*********************************************************************************//
-#define TCFG_EQ_ENABLE                      	1     //支持EQ功能,EQ总使能
+#define TCFG_EQ_ENABLE                      	0     //支持EQ功能,EQ总使能
 #if TCFG_EQ_ENABLE
 #define TCFG_BT_MUSIC_EQ_ENABLE             	1     //支持蓝牙音乐EQ
 #define TCFG_PHONE_EQ_ENABLE                	1     //支持通话近端EQ
@@ -521,7 +521,7 @@ DAC硬件上的连接方式,可选的配置：
 #define TCFG_DYNAMIC_EQ_ENABLE              0     //动态eq使能，接在eq后，需输入32bit位宽数据
 #endif//TCFG_EQ_ENABLE
 
-#define TCFG_DRC_ENABLE						1 	  //DRC 总使能
+#define TCFG_DRC_ENABLE						0 	  //DRC 总使能
 #define TCFG_AUDIO_MDRC_ENABLE              0     //多带drc使能  0:关闭多带drc，  1：使能多带drc  2：使能多带drc 并且 多带drc后再做一次全带的drc
 
 #if TCFG_DRC_ENABLE
@@ -676,7 +676,7 @@ DAC硬件上的连接方式,可选的配置：
 #define TCFG_USER_EMITTER_ENABLE            0   //emitter功能使能
 #define TCFG_BT_SNIFF_ENABLE                0   //bt sniff 功能使能
 
-#define USER_SUPPORT_PROFILE_SPP    1
+#define USER_SUPPORT_PROFILE_SPP    0
 #define USER_SUPPORT_PROFILE_HFP    1
 #define USER_SUPPORT_PROFILE_A2DP   1
 #define USER_SUPPORT_PROFILE_AVCTP  1
@@ -697,12 +697,12 @@ DAC硬件上的连接方式,可选的配置：
 #endif
 
 #define BT_INBAND_RINGTONE                  0   //是否播放手机自带来电铃声
-#define BT_PHONE_NUMBER                     1   //是否播放来电报号
+#define BT_PHONE_NUMBER                     0  //是否播放来电报号
 #define BT_SYNC_PHONE_RING                  0   //是否TWS同步播放来电铃声
 #define BT_SUPPORT_DISPLAY_BAT              1   //是否使能电量检测
-#define BT_SUPPORT_MUSIC_VOL_SYNC           1   //是否使能音量同步
+#define BT_SUPPORT_MUSIC_VOL_SYNC           0   //是否使能音量同步
 
-#define TCFG_BLUETOOTH_BACK_MODE			1	//后台模式
+#define TCFG_BLUETOOTH_BACK_MODE			0	//后台模式
 
 #if (TCFG_USER_TWS_ENABLE && TCFG_BLUETOOTH_BACK_MODE) && (TCFG_BT_SNIFF_ENABLE==0) && defined(CONFIG_LOCAL_TWS_ENABLE)
 #define TCFG_DEC2TWS_ENABLE					1	// 本地解码转发
@@ -756,14 +756,14 @@ DAC硬件上的连接方式,可选的配置：
 //*********************************************************************************//
 #define TCFG_DEC_G729_ENABLE                ENABLE
 #define TCFG_DEC_MP3_ENABLE					ENABLE
-#define TCFG_DEC_WMA_ENABLE					ENABLE
-#define TCFG_DEC_WAV_ENABLE					ENABLE
-#define TCFG_DEC_FLAC_ENABLE				ENABLE
-#define TCFG_DEC_APE_ENABLE					ENABLE
-#define TCFG_DEC_M4A_ENABLE					ENABLE
-#define TCFG_DEC_ALAC_ENABLE				ENABLE
-#define TCFG_DEC_AMR_ENABLE					ENABLE
-#define TCFG_DEC_DTS_ENABLE					ENABLE
+#define TCFG_DEC_WMA_ENABLE					0
+#define TCFG_DEC_WAV_ENABLE					0
+#define TCFG_DEC_FLAC_ENABLE				0
+#define TCFG_DEC_APE_ENABLE					0
+#define TCFG_DEC_M4A_ENABLE					0
+#define TCFG_DEC_ALAC_ENABLE				0
+#define TCFG_DEC_AMR_ENABLE					0
+#define TCFG_DEC_DTS_ENABLE					0
 #define TCFG_DEC_G726_ENABLE			    DISABLE
 #define TCFG_DEC_MIDI_ENABLE			    DISABLE
 #define TCFG_DEC_MTY_ENABLE					DISABLE
@@ -867,10 +867,10 @@ DAC硬件上的连接方式,可选的配置：
 //*********************************************************************************//
 #define TCFG_ENC_CVSD_ENABLE               ENABLE
 #define TCFG_ENC_MSBC_ENABLE               ENABLE
-#define TCFG_ENC_G726_ENABLE               ENABLE
-#define TCFG_ENC_MP3_ENABLE                ENABLE
-#define TCFG_ENC_ADPCM_ENABLE              ENABLE
-#define TCFG_ENC_PCM_ENABLE                ENABLE
+#define TCFG_ENC_G726_ENABLE               0
+#define TCFG_ENC_MP3_ENABLE                0
+#define TCFG_ENC_ADPCM_ENABLE              0
+#define TCFG_ENC_PCM_ENABLE                0
 #define TCFG_ENC_SBC_ENABLE                ENABLE
 #define TCFG_ENC_OPUS_ENABLE               DISABLE
 #define TCFG_ENC_SPEEX_ENABLE              DISABLE

apps/soundbox/board/br23/board_ac695x_demo/key_table/adkey_table.c

@@ -12,22 +12,22 @@
 const u16 bt_key_ad_table[KEY_AD_NUM_MAX][KEY_EVENT_MAX] = {
     //单击             //长按          //hold         //抬起            //双击                //三击
     [0] = {
-        KEY_CHANGE_MODE,	KEY_POWEROFF,	KEY_POWEROFF_HOLD,			KEY_NULL,		KEY_NULL,	KEY_NULL
+        KEY_MUSIC_PP,	KEY_POWEROFF,	KEY_POWEROFF_HOLD,			KEY_NULL,		KEY_CALL_LAST_NO,	KEY_NULL
     },
     [1] = {
-        KEY_MUSIC_PREV,	KEY_VOL_DOWN,		KEY_VOL_DOWN,		KEY_NULL,		KEY_NULL,			KEY_NULL
+        KEY_KT_FRONT_FAN,	KEY_VOL_UP,		KEY_VOL_UP,		KEY_NULL,		KEY_MUSIC_PREV,			KEY_NULL
     },
     [2] = {
-        KEY_MUSIC_PP, KEY_CALL_HANG_UP,		KEY_NULL,	KEY_NULL,		KEY_CALL_LAST_NO,			KEY_NULL
+        KEY_KT_REAR_FAN, KEY_VOL_DOWN,		KEY_VOL_DOWN,	KEY_NULL,		KEY_MUSIC_NEXT,			KEY_NULL
     },
     [3] = {
-        KEY_MUSIC_NEXT,	KEY_VOL_UP,			KEY_VOL_UP,			KEY_NULL,		KEY_NULL,			KEY_NULL
+        KEY_KT_LR_FAN,	KEY_KT_AIR_COND,			KEY_NULL,			KEY_NULL,		KEY_NULL,			KEY_NULL
     },
     [4] = {
-        KEY_NULL,		KEY_NULL,			KEY_NULL,			KEY_NULL,		KEY_REVERB_OPEN,	KEY_NULL
+        KEY_KT_LED,		KEY_KT_MASSAGE_MODE,			KEY_NULL,			KEY_NULL,		KEY_NULL,	KEY_NULL
     },
     [5] = {
-        KEY_NULL,		KEY_NULL,			KEY_NULL,			KEY_NULL,		KEY_ENC_START,		KEY_NULL
+        KEY_NULL,		KEY_NULL,			KEY_NULL,			KEY_NULL,		KEY_NULL,		KEY_NULL
     },
     [6] = {
         KEY_NULL,		KEY_NULL,			KEY_NULL,			KEY_NULL,		KEY_NULL,			KEY_NULL

apps/soundbox/common/init.c

@@ -9,6 +9,8 @@
 #include "chgbox_ctrl.h"
 #include "update_loader_download.h"
 
+#include "kt.h"
+
 
 extern void setup_arch();
 extern int audio_dec_init();
@@ -102,6 +104,7 @@ static void app_init()
     do_platform_initcall();
 
     board_init();
+    kt_boot_init();
 
     do_initcall();
 

apps/soundbox/include/key_event_deal.h

@@ -172,6 +172,12 @@ enum {
     KEY_IR_NUM_8,
     KEY_IR_NUM_9,//中间不允许插入
     //在这里增加元素
+    KEY_KT_FRONT_FAN,
+    KEY_KT_REAR_FAN,
+    KEY_KT_LR_FAN,
+    KEY_KT_LED,
+    KEY_KT_AIR_COND,   
+    KEY_KT_MASSAGE_MODE,
     //
     KEY_HID_MODE_SWITCH,
     KEY_HID_TAKE_PICTURE,

apps/soundbox/include/tone_player.h

@@ -94,6 +94,40 @@ enum {
 #define TONE_RECORD 			TONE_RES_ROOT_PATH"tone/record.*"
 #define TONE_SPDIF 			    TONE_RES_ROOT_PATH"tone/spdif.*"
 
+#define TONE_FFAN_L0            TONE_RES_ROOT_PATH"tone/FFAN0.*"
+#define TONE_FFAN_L1            TONE_RES_ROOT_PATH"tone/FFAN1.*"
+#define TONE_FFAN_L2            TONE_RES_ROOT_PATH"tone/FFAN2.*"
+#define TONE_FFAN_L3            TONE_RES_ROOT_PATH"tone/FFAN3.*"
+#define TONE_FFAN_L4            TONE_RES_ROOT_PATH"tone/FFAN4.*"
+#define TONE_FFAN_L5            TONE_RES_ROOT_PATH"tone/FFAN5.*"
+#define TONE_FFAN_L6            TONE_RES_ROOT_PATH"tone/FFAN6.*"
+
+#define TONE_BFAN_L0            TONE_RES_ROOT_PATH"tone/BFAN0.*"
+#define TONE_BFAN_L1            TONE_RES_ROOT_PATH"tone/BFAN1.*"
+#define TONE_BFAN_L2            TONE_RES_ROOT_PATH"tone/BFAN2.*"
+#define TONE_BFAN_L3            TONE_RES_ROOT_PATH"tone/BFAN3.*"
+#define TONE_BFAN_L4            TONE_RES_ROOT_PATH"tone/BFAN4.*"
+#define TONE_BFAN_L5            TONE_RES_ROOT_PATH"tone/BFAN5.*"
+#define TONE_BFAN_L6            TONE_RES_ROOT_PATH"tone/BFAN6.*"
+
+#define TONE_CFAN_L0            TONE_RES_ROOT_PATH"tone/CFAN0.*"
+#define TONE_CFAN_L1            TONE_RES_ROOT_PATH"tone/CFAN1.*"
+#define TONE_CFAN_L2            TONE_RES_ROOT_PATH"tone/CFAN2.*"
+#define TONE_CFAN_L3            TONE_RES_ROOT_PATH"tone/CFAN3.*"
+#define TONE_CFAN_L4            TONE_RES_ROOT_PATH"tone/CFAN4.*"
+#define TONE_CFAN_L5            TONE_RES_ROOT_PATH"tone/CFAN5.*"
+#define TONE_CFAN_L6            TONE_RES_ROOT_PATH"tone/CFAN6.*"
+
+#define TONE_AC_L0            TONE_RES_ROOT_PATH"tone/AC0.*"
+#define TONE_AC_L1            TONE_RES_ROOT_PATH"tone/AC1.*"
+#define TONE_AC_L2            TONE_RES_ROOT_PATH"tone/AC2.*"
+
+#define TONE_LT_L0            TONE_RES_ROOT_PATH"tone/LT0.*"
+#define TONE_LT_L1            TONE_RES_ROOT_PATH"tone/LT1.*"
+#define TONE_LT_L2            TONE_RES_ROOT_PATH"tone/LT2.*"
+
+
+
 #ifdef CONFIG_CPU_BR18
 #undef TONE_POWER_ON
 #undef TONE_POWER_OFF

apps/soundbox/task_manager/bt/bt.c

@@ -96,6 +96,8 @@
 #include "tuya_multi/tuya_le_multi_common.h"
 #include "multi_demo/le_multi_common.h"
 
+#include "kt.h"
+
 
 #define LOG_TAG_CONST        BT
 #define LOG_TAG             "[BT]"
@@ -911,6 +913,10 @@ int bt_key_event_handler(struct sys_event *event)
         return true;
     }
 
+    if (kt_key_event_filter_after(key_event,key_value) == true) {
+        return true;
+    }
+
     switch (key_event) {
 
     case  KEY_MUSIC_PP:

apps/soundbox/task_manager/bt/bt_key_fun.c

@@ -33,6 +33,7 @@
 #include "app_chargestore.h"
 #include "app_charge.h"
 #include "app_main.h"
+#include "kt_led7.h"
 #include "app_power_manage.h"
 #include "user_cfg.h"
 
@@ -500,6 +501,7 @@ void bt_key_vol_up()
     }
     volume_up();
     vol = app_audio_get_volume(APP_AUDIO_CURRENT_STATE);
+    kt_led7_show_u_volume(vol, 5);
     UI_SHOW_MENU(MENU_MAIN_VOL, 1000, vol, NULL);
     UI_MSG_POST("music_vol:vol=%4", vol);
 }
@@ -519,6 +521,7 @@ void bt_key_vol_down()
     }
     volume_down();
     vol = app_audio_get_volume(APP_AUDIO_CURRENT_STATE);
+    kt_led7_show_u_volume(vol, 5);
     UI_SHOW_MENU(MENU_MAIN_VOL, 1000, vol, NULL);
     UI_MSG_POST("music_vol:vol=%4", vol);
 }

apps/soundbox/task_manager/linein/linein_api.c

@@ -11,6 +11,7 @@
 #include "linein/linein_dev.h"
 #include "linein/linein.h"
 #include "key_event_deal.h"
+#include "kt_led7.h"
 #include "user_cfg.h"
 #include "ui/ui_api.h"
 #include "fm_emitter/fm_emitter_manage.h"
@@ -359,6 +360,7 @@ void linein_key_vol_up()
         }
     }
     vol = __this->volume;
+    kt_led7_show_u_volume(vol, 5);
     UI_SHOW_MENU(MENU_MAIN_VOL, 1000, vol, NULL);
     log_info("vol+:%d\n", __this->volume);
 }
@@ -376,6 +378,7 @@ void linein_key_vol_down()
         linein_volume_set(__this->volume);
     }
     vol = __this->volume;
+    kt_led7_show_u_volume(vol, 5);
     UI_SHOW_MENU(MENU_MAIN_VOL, 1000, vol, NULL);
     log_info("vol-:%d\n", __this->volume);
 }

apps/soundbox/task_manager/power_on/power_on.c

@@ -12,6 +12,7 @@
 #include "ui/ui_api.h"
 #include "app_task.h"
 #include "key_event_deal.h"
+#include "kt.h"
 
 
 #define LOG_TAG_CONST       APP_IDLE
@@ -129,6 +130,8 @@ static void  tone_play_end_callback(void *priv, int flag)
 void app_poweron_task()
 {
     int msg[32];
+    kt_init();
+    
 
     UI_SHOW_MENU(MENU_POWER_UP, 0, 0, NULL);
 

cpu/br23/audio_config.h

@@ -75,7 +75,7 @@
      TCFG_AUDIO_DAC_CONNECT_MODE == DAC_OUTPUT_DUAL_LR_DIFF)
 #define MAX_ANA_VOL             (21)
 #else
-#define MAX_ANA_VOL             (28)
+#define MAX_ANA_VOL             (30)
 #endif/*TCFG_AUDIO_DAC_CONNECT_MODE*/
 
 #define MAX_COM_VOL             (22)    // 具体数值应小于联合音量等级的数组大小 (combined_vol_list)
@@ -96,8 +96,8 @@
 #endif
 
 
-#define SYS_DEFAULT_VOL         	0//SYS_MAX_VOL  //(SYS_MAX_VOL/2)
-#define SYS_DEFAULT_TONE_VOL    	18 //(SYS_MAX_VOL)
+#define SYS_DEFAULT_VOL         	SYS_MAX_VOL//SYS_MAX_VOL  //(SYS_MAX_VOL/2)
+#define SYS_DEFAULT_TONE_VOL    	SYS_MAX_VOL //(SYS_MAX_VOL)
 #define SYS_DEFAULT_SIN_VOL     	17
 
 #define APP_AUDIO_STATE_IDLE        0

cpu/br23/audio_dec/audio_dec.c

@@ -1008,9 +1008,18 @@ REGISTER_LP_TARGET(audio_dec_init_lp_target) = {
 
 #if AUDIO_OUTPUT_AUTOMUTE
 
+#include "kt.h"
+
 void audio_mix_out_automute_mute(u8 mute)
 {
-    printf(">>>>>>>>>>>>>>>>>>>> %s\n", mute ? ("MUTE") : ("UNMUTE"));
+    //printf(">>>>>>>>>>>>>>>>>>>> %s\n", mute ? ("MUTE") : ("UNMUTE"));
+    if (mute)
+    {
+        PA_MUTE();
+    } else {
+        PA_UNMUTE();
+    }
+    
 }
 
 /* #define AUDIO_E_DET_UNMUTE      (0x00) */

cpu/br23/sdk_used_list.used

@@ -27,69 +27,12 @@ pcm_decoder
 
 
 mp3_decoder
-
-
-
-
-
-
-wma_decoder
-
-
-
-
-
-
-flac_decoder
-
-
-
-ape_decoder
-
-
-
-m4a_decoder
-
-
-
-
-
-
-alac_decoder
-
-
-
-amr_decoder
-
-
-
-dts_decoder
-
-
-
 g729_decoder
-wav_decoder
 cvsd_encoder
 
 
 
 msbc_encoder
-
-
-
-mp3_encoder
-
-
-
-g726_encoder
-
-
-
-adpcm_encoder
-
-
-
-pcm_encoder
 sbc_encoder
 
 

cpu/br23/tools/download/standard/KTS_AC690x_5458.key

@@ -0,0 +1 @@
+44b10a8a9a97a7ea8795ce48fe8bb180954fc20c5763ded5954fc20c5763ded5399f4f1d

cpu/br23/tools/download/standard/download.bat

@@ -13,13 +13,13 @@ copy ..\..\ota_all.bin .
 copy ..\..\ota_nor.bin .
 
 
-..\..\isd_download.exe -tonorflash -dev br23 -boot 0x12000 -div8 -wait 300 -uboot uboot.boot -app app.bin -res tone.cfg cfg_tool.bin eq_cfg_hw.bin -format all %1
+..\..\isd_download.exe -tonorflash -dev br23 -boot 0x12000 -div8 -wait 300 -uboot uboot.boot -app app.bin -res tone.cfg cfg_tool.bin eq_cfg_hw.bin -format all %1 -key KTS_AC690x_5458.key
 :: -format all
 ::-reboot 2500
 
   
 
-@rem 删除临时文件-format all
+@rem ɾ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD>ļ<EFBFBD>-format all
 if exist *.mp3 del *.mp3 
 if exist *.PIX del *.PIX
 if exist *.TAB del *.TAB
@@ -28,13 +28,13 @@ if exist *.sty del *.sty
 
 
 
-@rem 生成固件升级文件
+@rem <EFBFBD><EFBFBD><EFBFBD>ɹ̼<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
 copy ota_all.bin ota.bin
 ..\..\fw_add.exe -noenc -fw jl_isd.fw  -add ota.bin -type 100 -out jl_isd_all.fw
 copy ota_nor.bin ota.bin
 ..\..\fw_add.exe -noenc -fw jl_isd.fw  -add ota.bin -type 100 -out jl_isd_nor.fw
 
-@rem 添加配置脚本的版本信息到 FW 文件中
+@rem <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ýű<EFBFBD><EFBFBD>İ汾<EFBFBD><EFBFBD>Ϣ<EFBFBD><EFBFBD> FW <20>ļ<EFBFBD><C4BC><EFBFBD>
 ..\..\fw_add.exe -noenc -fw jl_isd_all.fw -add script.ver -out jl_isd_all.fw
 ..\..\fw_add.exe -noenc -fw jl_isd_nor.fw -add script.ver -out jl_isd_nor.fw
 
@@ -48,16 +48,16 @@ copy jl_isd_all.fw jl_isd.fw
 del jl_isd_all.ufw jl_isd_nor.ufw jl_isd_all.fw jl_isd_nor.fw
 
 
-@REM 生成配置文件升级文件
+@REM <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>
 ::ufw_maker.exe -chip AC800X %ADD_KEY% -output config.ufw -res bt_cfg.cfg
 
 ::IF EXIST jl_696x.bin del jl_696x.bin 
 
 
-@rem 常用命令说明
-@rem -format vm        //擦除VM 区域
-@rem -format cfg       //擦除BT CFG 区域
-@rem -format 0x3f0-2   //表示从第 0x3f0 个 sector 开始连续擦除 2 个 sector(第一个参数为16进制或10进制都可，第二个参数必须是10进制)
+@rem <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD>
+@rem -format vm        //<EFBFBD><EFBFBD><EFBFBD><EFBFBD>VM <20><><EFBFBD><EFBFBD>
+@rem -format cfg       //<EFBFBD><EFBFBD><EFBFBD><EFBFBD>BT CFG <20><><EFBFBD><EFBFBD>
+@rem -format 0x3f0-2   //<EFBFBD><EFBFBD>ʾ<EFBFBD>ӵ<EFBFBD> 0x3f0 <20><> sector <20><>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 2 <20><> sector(<28><>һ<EFBFBD><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϊ16<31><36><EFBFBD>ƻ<EFBFBD>10<31><30><EFBFBD>ƶ<EFBFBD><C6B6>ɣ<EFBFBD><C9A3>ڶ<EFBFBD><DAB6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>10<31><30><EFBFBD><EFBFBD>)
 
 ping /n 2 127.1>null
 IF EXIST null del null